PC Case fans are used to increase the airflow inside your computer case and thus help in lowering the temperature of various components installed in your PC case. But if you are an enthusiast and building a high-end fancy gaming PC with all RGB LED lighting and stuff i.e. RGB RAM, RGB CPU Cooler, RGB LED Strips, etc. then you need RGB LED Case fans too because they look really amazing and do enhance the beauty of your high-end futuristic gaming PC. An RGB Fan is a fan that comes with RGB LEDs that lits up the fan with RGB lighting. The RGB lighting can be in the form of an RGB LED Ring around the fan blades or it is directed towards fan blades or can be both. The RGB lighting looks amazing with different lighting effects and for best results, you should a tempered glass case to get the most out of these RGB fans or other RGB LED-supported components.
You won’t get the best case fans from Noctua’s in RGB variant, but you can still find some very good RGB Case Fans from popular brands like Corsair, NXZT, Deepcool, etc. I have already covered the best case fans in this blog earlier, but here in this post, I am going to list down the best RGB LED Fans that can light up your gaming PC without compromising any performance.
Read also: Best RGB PC Cases for Building a Fancy Gaming PC
Important Note: You will need a motherboard with RGB headers or an RGB controller to control the lighting & effects of your RGB fans. There are two types of RGB headers: 12V 4-pin RGB header for non-addressable RGB devices and a 5V 3-pin RGB header for addressable RGB LED devices. These RGB headers are not cross-compatible with each other so do not plug an RGB fan with a 4-pin RGB connector (12V) to a 3-pin RGB header (5v) or vice versa, because doing so will cause damage to your RGB fans or RGB LEDs. Below you can see a 12V and a 5V RGB header on a motherboard.
Best 120mm RGB Fans
Here are the best 120mm RGB fans from some of the reputed and top computer hardware brands. These RGB fans offer great cooling performance and also look great with their dynamic RGB lighting and effects.
Deepcool RF 120 RGB LED PWM Fan
This is a 120mm RGB fan from Deepcool which is quite famous for its wide range of computer cooling solutions and computer cases. Deepcool RF120 RGB LED fan comes with 6 RGB LEDs and transparent fan blades for lighting. It is a pretty silent and reliable RGB LED fan that comes with a cable controller for changing lighting modes, LED brightness, and speed of lighting.
Along with cool RGB lighting effects, the fan offers a good amount of cooling performance and is equipped with rubber pads on the corners to reduce shocks and vibrations. It is also available in a pack of three that includes a fan hub on which you can connect up to 6 of these RGB fans or any other Deepcool RGB devices. Deepcool RF 120 RGB fans are compatible with Asus AURA Sync RGB lighting. These RGB fans are mainly used as Case Fans but they may be used on the radiators too. These Deepcool RGB fans are not expensive and are very much affordable. Highly Recommended by me for use as RGB Case Fans.
| Deepcool RF 120 RGB LED PWM Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydro bearing |
| Fan Speed | 500 to 1500 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 56.5CFM |
| Noise Level | 17.8~27dB(A) |
| RGB Lighting Type | Transparent Fan Blades (6 RGB LEDs) |
| Features | PWM control, 6 RGB LEDs, Asus AURA Sync Compatible, Anti-vibration rubber design, Intelligent PWM functions, Multiple RGB Lighting modes, RGB Cable controller, Balanced airflow and air pressure design |
Buy Deepcool RF 120 RGB PWM Fan
Corsair ML120 PRO RGB LED Magnetic Levitation Fan
This is one of the best RGB LED fans that you can get for your fancy gaming PC. This is an advanced RGB Fan that uses ultra-low friction magnetic levitation bearing technology for delivering more airflow and higher static pressure with very lower noise generation. The fan consists of four hub-mounted individually controlled RGB LEDs that deliver great lighting effects with vibrant colors.
It is also available in three fan kits and comes with a lighting node. You can change the colors and lighting effects of these RGB fans using the Corsair Link Software. The fan is PWM controlled which means you do not have to worry about changing its speed every now and then. The fan has got transparent blades which further enhance the beauty and the lighting coverage.
The RGB LEDs are quite bright and look amazing in your computer case. It also has rubber corners for preventing shocks and vibrations due to the spinning of the fan. The 3-pack fan bundle consists of three Corsair RGB Fans, one RGB lighting hub, one Lighting Node PRO, twelve Fan mounting screws, and two Mounting Strips for Lighting Node PRO. So, if you are looking for high-quality RGB fans with great features and performance then you must get these Corsair RGB Fans.
| Corsair ML120 PRO RGB LED Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Magnetic Levitation |
| Fan Speed | 400 – 1600 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 47.3 CFM |
| Noise Level | 25 dBA |
| RGB Lighting Type | Transparent Fan Blades |
| Features | PWM Controlled, 4 RGB LEDs, RGB Lighting Effects using Corsair Link Software, RGB lighting hub, Lighting Node PRO, Rubber Corners |
Buy Corsair ML120 PRO RGB LED Fan
NZXT Aer RGB LED 120mm Case Fan
NZXT is a reputed computer hardware company that is known for its high-quality computer cases and cooling solutions. Here we have got NZXT Aer RGB LED 120mm case fan that looks very elegant, classy, and beautiful with its amazing RGB LED ring that contains 8 RGB LEDs. The RGB LED ring is this fan is a bit different in shape compared to other RGB LED Ring fans, because it is slightly wider at the corners, which gives it a unique and amazing look when lit up.
This NXZT RGB Fan comes with Fluid Dynamic Bearing (FDB) and is pretty quiet in operation, especially at lower speeds. The fan also pushes a good amount of air and has got maximum airflow of 52.44 CFM. It is also available in a pack of three and is PWM controlled maintaining a great balance between cooling and quieter operation. These RGB Fans are HUE+ and CAM-compatible and you can daisy chain them for additional lighting effects. So, if you want beautiful-looking and performance-driven RGB LED fans from a top brand then you must go for them.
| NZXT Aer RGB LED 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Fluid Dynamic Bearing (FDB) |
| Fan Speed | 500 – 1500 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 52.44 CFM |
| Noise Level | 22 – 33 dBA |
| RGB Lighting Type | RGB LED Ring (8 RGB LEDs) |
| Features | HUE+ and CAM-compatible, RGB LED Lighting effects, Uniform light dispersion with unique light guide design, 10 Lighting effects, Rubber Corners |
Buy NZXT Aer RGB LED 120mm Fan
Enermax T.B. RGB 120mm Case Fan
This is a very unique designed RGB case fan from Enermax. This RGB Fan has got 4 RGB LED rings side by side that looks very stylish, modern, futuristic, and amazing when in operation. The fan comes with its patented Twister bearing for low noise and a long lifetime (MTBF≥160k hours). Another main feature of this RGB Fan is detachable fan blades which makes them easier to clean.
The 6-pack of this fan comes with Remote control and an Enermax RGB control box on which you can add up to 8 RGB fans and up to 2 RGB LED devices. The RGB fan is also compatible with 4-pin RGB headers on the motherboard. It is also compatible with other popular RGB lighting software that include Asus Aura Sync, AsRock RGB LED, Gigabyte RGB Fusion, and MSI Mystic Light Sync. For avoiding shocks and vibration, it has got rubber pads at corners. The fan has good cooling performance but it can be a bit loud at higher speeds. Overall, great RGB LED ring fans with four RGB LED rings.
| Enermax T.B. RGB 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Twister Bearing |
| Fan Speed | 500 – 1500 RPM |
| Connector Type | 6-Pin / 4-Pin |
| Maximum Airflow | 47.53 CFM |
| Noise Level | 22dBA |
| RGB Lighting Type | Four RGB LED Rings |
| Features | Compatible with Asus Aura Sync, AsRock RGB LED, Gigabyte RGB Fusion, MSI Mystic Light Sync, Halo Arc Shaped Frame, Enermax RGB Control Box, Remote Control, Detachable Fan blade, Rubber Pads on Corners, compatible with 4-pin RGB header on motherboards |
Buy Enermax T.B. RGB 120mm Fan
Corsair LL120 RGB 120mm Dual Light Loop Case Fan
[Best Looking RGB Fan, Diffused RGB Lighting]
Stunning looking RGB LED Fan from Corsair that comes with dual light loop RGB LEDs. According to me, these are one of the best-looking RGB LED fans that you can ever find. Corsair LL120 dual light loop case fan comes with 16 independent RGB LEDs across two separate light loops to create vibrant lighting and visual effects. The RGB LED effects in these fans look breathtaking and you can control the various light effects and modes using the Corsair Link software. The RGB LEDs are very bright they really lit up your computer case.
They are available in a pack of three with CORSAIR Lighting Node PRO and RGB Lighting Hub included. These colorful RGB Corsair fans offer great performance and are also pretty quiet in operation. They are PWM controlled which means their speeds are adjusted automatically by the motherboard depending upon the temperature inside the case. These fans require a 4-pin connector on your motherboard. So, if you are looking for some cool RGB lighting fans with dual-loop lighting effects then you must get them. They are a bit more costly than other RGB fans but are totally worth it. Highly Recommended by me.
| Corsair LL120 RGB 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Fan Speed | 600 – 1500 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 43.25 CFM |
| Noise Level | 24.8 dBA |
| RGB Lighting Type | Dual light loop RGB LED, 16 RGB LEDs |
| Features | PWM Controlled, Amazing Dual Light Loop RGB LED Effects, Corsair Link software integration, transparent fan blades, CORSAIR Lighting Node Pro |
Buy Corsair LL120 RGB Dual Light Loop Fan
Fractal Design Prisma AL-12 PWM
[High-Performance RGB Fan for Radiators & Heatsinks]
Fractal Design is a brand that is pretty well known for its high-quality and sturdy computer cases and case fans. Here we have a high-performance RGB fan from it which is Fractal Design Prisma AL-12 PWM. The fan comes with six hub-mounted Addressable RGB LEDs, and white translucent fan blades, and an outer ring that diffuses the RGB lighting uniformly and looks great. This is a PWM fan with a speed in the range of 500 – 2000 RPM and generates high airflow and high static pressure of 85.71 CFM and 2.78 mmH2O respectively. For RGB connection, it comes with a 3-pin ARGB connector that can be used with a 3-pin ARGB header on a supported motherboard or with an ARGB Controller, e.g. Fractal Design Adjust R1 RGB controller.
The fan is mostly silent but can become a bit noisy at full speed and has a maximum noise rating of 32.7 dBA. It comes with long life sleeve bearing and has got anti-vibration rubber pads on the corners to eliminate vibrational noise. The fan has a sturdy construction and comes with a black sleeved cable for extra protection. Because of its high airflow and high static pressure, this fan can be used as a PC case fan, radiator fan, or CPU fan for heatsinks.
Note: A 3-pin model of this fan is also available as Fractal Design Prisma AL-12, which is quieter (19 dBA) at the expense of some performance. It has a constant speed of 1200 RPM and generates airflow of 50.63 CFM and static pressure of 1.27mm H2O. You can check both the variants out from the links given below, and you can also save some money by going for the 3-pack offering.
| Fractal Design Prisma AL-12 PWM Specifications | |
| Fan Size | 120mm |
| Bearing Type | LLS (Long Life Sleeve) bearing |
| Fan Speed | 500 – 2000 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 85.71 CFM |
| Noise Level | 32.7 dBA |
| RGB Lighting Type | Fan Blades & Ring (6 ARGB LEDs) |
| Features | Black Sleeved Cable, supports Asus AURA, Gigabyte Fusion, MSI Mystic Light, and ASRock Polychrome, Trip Wire technology for enhanced Blade efficiency, Anti-vibration rubber pads on corners, supports daisy-chaining |
Buy Fractal Design Prisma AL-12 PWM
Buy Fractal Design Prisma AL-12 (3-pin)
Corsair HD120 RGB LED Case Fan
If you want a cheaper option than the Corsair LL120 RGB fan then the answer is Corsair HD120 RGB LED fan. This is also great looking and high-performance RGB Case fan that has got 12 independent frame-mounted RGB LEDs. It is a high static pressure fan and has a greater airflow of 54.4 CFM. The fan can be a little loud at higher RPMs but in general, it is relatively quieter in operation. It has got hydraulic bearing and is PWM controlled.
The fan is also available in a pack of three and it comes with a 6-port RGB LED hub and Fan RGB LED Controller. The 3-button controller is used to cycle the fans through 7-lighting modes that include fading, breathing, blinking, and more. Overall these are great RGB lighting fans that are big on cooling performance and provide good RGB lighting.
| Corsair HD120 RGB LED Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Fan Speed | 800 – 1725 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 54.4 CFM |
| Noise Level | 18 – 30 dBA |
| RGB Lighting Type | Frame and Fan Blade, 12 RGB LEDs |
| Features | PWN Control, 3-button controller, high static pressure, transparent fan blades, 7 unique lighting modes |
Buy Corsair HD120 RGB LED Case Fan
COUGAR VORTEX RGB HPB 120 PWM Fan
[Best RGB Ring Fan]
This is a beautiful-looking RGB fan from Cougar and has a thick RGB LED Ring across the fan blades. The fan comes with 18 addressable RGB LEDs and supports a 5V RGB header directly from the motherboard. This is a PWM fan and has speed in the range of 600 to 1500 RPM and comes with Hydro-Dynamic Bearing (HDB) for reliability, durability, longevity, and for lower noise levels. The fan generates an airflow of 43.54 CFM and static pressure of 1.17 mmH2O. It is more suited as a PC case fan (intake & exhaust) rather than a fan for heatsinks and radiators.
The RGB lighting and effects of the fan can be controlled using the Cougar control box (sold separately) or through the motherboard with a 5V RGB header using RGB software. The RGB lighting is bright and looks very cool when lit up to its full glory. The build quality of the fan is also top-notch and it has got patented frame design and rubber pads on the corners for reducing vibrations and noise. The maximum noise level rating is 26 dBA and thus the fan falls in the category of silent RGB fans. The package includes 4 Pin Fan to PSU Connector, 5V Addressable Header Adapter, and Fan Screws. Overall, high quality and one of the best-looking RGB fans that you can buy for your gaming PC.
| COUGAR VORTEX RGB HPB 120 PWM Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydro-Dynamic Bearing |
| Fan Speed | 600 – 1500 RPM |
| Connector Type | 4-pin PWM / 3-pin (LED) |
| Maximum Airflow | 43.54 CFM |
| Noise Level | 26 dBA |
| RGB Lighting Type | RGB LED Ring (Addressable RGB LEDs) |
| Features | 5V Addressable Header Adapter, Support for Control Boxes from the COUGAR Core Box Series, Patented Frame Design, 18 RGB LEDs, Tri-Directional Lighting |
Buy COUGAR VORTEX RGB HPB 120 PWM Fan
Buy 3-Pack with Cougar Control Box RGB Controller
Deepcool MF120S Frameless RGB Fan
[Frameless Design, 5V Add RGB Fan, Stylish & Fancy]
If you are looking for something groovy and unique then you should get this Deepcool MF120S Gamer Storm RGB Fan. This is a frameless RGB fan that stands out from the crowd and looks really amazing. The fan is mounted on an all-in-one skeleton frame that is made with 100% aluminum alloy. It comes with 5V RGB Addressable LEDs that are present on the skeleton frame of the fan. Also, the fan features Two-layer blower blades for improving its performance. This is a PWM fan that comes with Hydro bearing and spins at speed of 500 – 2000 RPM. The fan generates airflow of 45.4 CFM and static pressure of 1.67mm H2O, which is quite decent. It is a bit noisy at full speed and has a maximum noise level rating of 33.4 dBA. However, it does come with anti-vibration rubber padding on the corners to keep the noise levels in check. Due to its frame-less design, the fan is more suited as a case fan, especially as an exhaust fan. However, you can also use it as a radiator fan, but I would not recommend it as there are much better radiator fans out here with RGB lighting.
The RGB lighting on the fan can be controlled and synced by using the motherboard RGB software or using a compatible ARGB controller. It is compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI RGB Mystic Light Sync, and ASRock Polychrome RGB software. You can connect this fan to either a 5V RGB header on the motherboard or to an RGB controller that supports ARGB. A 5-port RGB hub comes included with it so that you can use this fan even when you don’t have a 5V ARGB header on the motherboard. Overall, a decent fan and it is more of a style statement rather than focusing mainly on performance.
| Deepcool MF120S Frameless RGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydro bearing |
| Fan Speed | 500 – 2000 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 45.4 CFM |
| Noise Level | 33.4 dBA |
| RGB Lighting Type | Fan Frame |
| Features | Frameless Design, Two layer blower blades designed for maximum efficiency, 5-port RGB hub is included with the fans, Anti-vibration rubber pads on corners |
Buy Deepcool MF120S Frameless RGB Fan
Antec Prizm 120mm ARGB Fan
Here we have Antec Prizm 120mm ARGB Fan which is a PWM-controlled fan with Hydraulic bearing and has a maximum speed of 2000 RPM. The fan comes with Dual RGB Rings with 18 independent controlled LEDs that are very bright and looks amazing with various RGB lighting effects. The fan generates Airflow of 45.03 CFM and Static Pressure of 2.56 mmH2O. Due to its high static pressure, the fan is more suitable for use on Radiators but it can also be used in PC cases, both as an intake and exhaust fan.
The maximum noise level of this fan is 32dBA at full speed which is a bit on the louder side. It generally comes in a pack of 3 or 5 with its own RGB controller. The RGB fan is also compatible with Asus Aura Sync and other RGB software from MSI, Gigabyte, and ASRock and you can directly connect this fan to the 3-pin (5V) ARGB header on your motherboard. So, if you are looking for branded RGB Radiator Fans then these are really worth your money.
| Antec Prizm 120mm ARGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic bearing |
| Fan Speed | 2000 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 45.03 CFM |
| Noise Level | 32 dBA |
| RGB Lighting Type | RGB LED Dual Ring |
| Features | 16.8 Million Colors & 18 Independent Controlled LEDs, Compatible Asus Aura RGB Sync, RGB Controller Hub included |
Buy Antec Prizm 120mm ARGB Fan [5-Pack]
LIAN LI BORA 120mm RGB Fan
[Great ARGB Fans with Solid Build, Customizable, Quiet, Affordable]
Lian Li is a reputed brand that is known for its high-quality and wide range of computer cases. Here we have a new set of RGB fans from it, which is LIAN LI BORA 120mm RGB Fans. These are addressable RGB fans that look great and offer great performance. The RGB lighting on this fan is in the form of a dispersion ring that has 16 ARGB LEDs in them. These are PWM controlled fans and come with a standard 4-pin PWM controller. For RGB lighting, a 3-pin connector is used that is compatible with the 5V 3-pin ARGB header on supported motherboards. The fans come with dual ball bearing for durability and longevity. They spin at speed in the range of 800 to 1900 RPM but can up get up to 2100 RPM too with no extra power for increased cooling performance.
The fan generates airflow of 57.2 CFM and static air pressure of 1.9 mm H2O. These are pretty good figures and because of it, they can be used as a case fan, radiator fan, or a CPU heatsink fan too. The fan is pretty silent and has got a noise rating of 29 dBA at maximum speed. It also comes with rubber pads at the corners for reducing vibrations and noise. The fan can be dismantled easily into four parts (main fan frame, illumination dispersion ring, front frame ring, rear frame ring) for easy cleaning. Also, it can be easily customized by swapping the aluminum ring frames with original Lian Li parts, or you can paint them in any color of your liking. These fans come in a pack of three and a wired RGB controller, fan hub and cables also come in the package. This means you don’t have to spend anything extra to make them work in your PC. Also, they are very reasonably priced and get a recommendation from my side.
| LIAN LI BORA 120mm RGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Dual Ball Bearing |
| Fan Speed | 800 – 1900 RPM |
| Connector Type | 4-pin PWM / 5V 3-pin (ARGB) |
| Maximum Airflow | 57.2 CFM |
| Noise Level | 29 dBA (Max) |
| RGB Lighting Type | Dispersion RGB Ring (ARGB) |
| Features | Rubber Pads at Corners, Customizable, 16 RGB LEDs, Aluminum Finish, Comes with wired RGB controller and Fan hub |
Buy LIAN LI BORA 120mm RGB Fans (3-pack)
Corsair SP120 RGB LED Case Fan
Corsair SP120 is the cheapest yet great-looking RGB LED Case fan from Corsair. These are fixed-speed RGB fans that spin at a fixed speed of 1400 RPM only. They require a 3-pin connector and have got hydraulic bearing. These Corsair RGB fans have got four hub-mounted RGB LEDs and translucent fan blades. It comes with a 3-button fan controller using which you can change lighting effects, effect speeds, and colors.
The performance of these RGB fans is good as they offer airflow of around 52 CFM. They also come in a pack of three fans that also include a 6-port RGB LED hub. They are quite affordable and carry a big brand name and reliability of Corsair. Overall high-performance budget RGB fans for users on a tight budget.
| Corsair SP120 RGB LED Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Fan Speed | 1400 RPM |
| Connector Type | 3-Pin |
| Maximum Airflow | 52 CFM |
| Noise Level | 26 dBA |
| RGB Lighting Type | In Translucent fan blades |
| Features | 3-button RGB controller, High Static Pressure |
Buy Corsair SP120 RGB Case Fan
Cooler Master MasterFan Pro 120 Air Balance RGB
A decent RGB fan from Cooler Master that looks good and offers a decent level of performance. The noise level is rated at 20dBA but, in reality, it does make some grinding noise, which can be very annoying for some users. The fan comes with its own POM (polyoxymethylene) bearing that offers a significantly longer lifespan as claimed by the company. The hybrid fan blades provide a great mix of static air pressure and airflow. It also comes in a pack of three with an RGB LED controller to change various lighting modes and the speed of the fan.
This Cooler Master MasterFan Pro 120 Air Balance RGB fan is compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and AsRock RGB LED lighting software. It does include rubber pads on the corners to reduce vibration and shocks generated due to the spinning of the fan. Another unique feature of this RGB fan is Jam protection which stops the fan from spinning if the blades are intruded on by a foreign object. This protects the fan blades and the motor from accidental damage. You can check out these Cooler Master RGB fans from the link given below.
| Cooler Master MasterFan Pro 120 Air Balance RGB Specifications | |
| Fan Size | 120mm |
| Bearing Type | POM Bearing |
| Fan Speed | 650 – 1300 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 42.7CFM |
| Noise Level | 20dBA (Max) |
| RGB Lighting Type | In Transparent Fan Blades |
| Features | Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, Rubber Mounting on Corners, 490k hours MTTF, Jam Protection |
Buy Cooler Master MasterFan Pro 120 RGB Fan
Thermaltake Riing 12 LED 120mm RGB Fan
Thermaltake Riing RGB fans are one of the most popular RGB fans in the computer hardware industry. Here we have Thermaltake Riing 12 LED RGB Fan which is a 120mm RGB fan for use in radiators and may also be used as an RGB case fan. These are high static pressure fans and they come with hydraulic bearing. They are pretty quiet in operation and are PWM controlled. The RGB LED ring is quite bright and is visible from all directions.
The three-pack bundle comes with a fan controller which allows you to switch between 5 LED modes including solid colors of red, blue, white, and green, or disable and cycle through 256 colors. The fan also includes rubber pads on corners for the reduction of shocks, noise, and vibrations. So, if you are looking for a high static pressure RGB Radiator fan from a reliable brand then you should definitely go for it. Recommended by me.
| Thermaltake Riing 12 LED RGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Fan Speed | 800 – 1500 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 40.6 CFM |
| Noise Level | 18.5 – 26.4 dBA |
| RGB Lighting Type | RBG LED Ring, 256 Colors, |
| Features | PWM Control, Smart Fan Controller, RGB LED Lighting and Effects, Wind Blocker Frame, anti-vibration mounting system, Tt LCS Certified, rubber pads on corners, patented design, concentrated compression blade, high static pressure fan |
Buy Thermaltake Riing 12 RGB LED Fan
Thermaltake Pure Plus 12 LED RGB Radiator Fan TT Premium Edition
Thermaltake Pure Plus 12 RGB is an RGB Radiator Fan from Thermaltake but it may also be used as a computer case fan too. The fan comes with 9 RGB LEDs and 9 Fan Blade design with its own Thermaltake RGB Controller. The fan uses hydraulic bearing and spins at speeds in the range of 500 to 1500 RPM. It is a relatively quieter fan @26BA and generates static pressure of 1.59mm-H2O and airflow of 56.45 CFM. It has got anti-vibration rubber pads on the corners for smooth and silent operation. The fan can only be used with the RGB controller it uses 9-pin to USB 2.0 interface. The fan cannot be run directly from the USB port as it can be run using its own RGB controller interface only that requires a 12V supply from a 4-pin Molex connector. Unlike the Thermaltake Riing RGB fans, these fans cover RGB lighting in all the fan blades.
This is a very special RGB fan because you can Voice control the RGB lighting, brightness, effects, and fan speed using Thermaltake’s patented TT RGB PLUS Software or App. The software is available for desktop (windows), android, and Mac. These are beautiful-looking RGB fans and have got premium build quality. It is available in a pack of three and you may check them out from the link given below. So, if you are looking for voice-controlled RGB fans with amazing LED lighting effects then go for it.
| Thermaltake Pure Plus 12 LED RGB Radiator Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic Bearing |
| Fan Speed | 500 – 1500 RPM |
| Connector Type | USB 2.0 connectors (9 Pin) |
| Maximum Airflow | 56.45 CFM |
| Noise Level | 25.8 CFM |
| RGB Lighting Type | RGB Lighting in Blades |
| Features | Anti-vibration rubber pads, 9 Fan Blade Design, RGB Controller included, 9 RGB LEDs with 16.8 Million Colors LED design, Thermaltake AI Voice Control Software |
Buy Thermaltake Pure Plus 12 LED RGB Radiator Fan
InWin Polaris RGB Fan 120mm
[Silent RGB Case Fan, Modular Connector Design]
A very clear-looking RGB fan from InWin with a transparent frame and translucent fan blades. This is indeed a beautiful RGB fan that comes with six independent RGB LEDs that really light up the fan blades and the frame very well. The 120mm fan comes with Sleeve bearing and rotates at speed in the range of 500 – 1280 RPM. The fan is very silent and has a maximum noise rating of 20.2 dBA only. This RGB fan comes with dual 8-Pin Modular connectors (4-Pin PWM + 4-pin 12V RGB) that also allows you to link it with other similar fans in a daisy chain arrangement. This allows for easier installation and tidier cable management. The four corners of the fan are fitted with shockproof rubber pads to eliminate vibrations and noise.
The fan including the frame is built using PBT plastic which is hard, durable, and also heat resistant. It generates airflow of 43.31 CFM and static air pressure of 1.26 mmH2O. It is better to use this fan as a case fan because the static pressure is not that great for use in Radiators and Heatsinks. The RGB lighting on the fan can be controlled using the popular RGB software that include Asus Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, and ASRock RGB LED. The fan is available in a single and twin pack, but it is better to buy it in a twin pack kit for better value.
Note: This fan is also available with an aluminum frame and you can check this variant out too from the link given below.
| InWin Polaris RGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Sleeve Bearing |
| Fan Speed | 500 – 1280 RPM |
| Connector Type | 8-Pin Modular (4-Pin PWM + 4-Pin RGB) |
| Maximum Airflow | 43.31 CFM |
| Noise Level | 20.2 dBA |
| RGB Lighting Type | RGB Fan Blades & Frame |
| Features | 8-Pin modular connector for Daisy Chaining, Shockproof Rubber Pads on Corners, PBT Frame, supports Asus Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock RGB LED software |
Buy InWin Polaris RGB Fan (Twin Pack)
InWin Polaris RGB Aluminum Fan (Twin Pack)
Best 140mm RGB Fans
Here are the best 140mm RGB fans from well-known computer brands or companies. These RGB fans offer higher airflow and cooling performance compared to the 120mm RGB LED fans mentioned above. All of the below-mentioned 140mm RGB Fans are the bigger variants of the same 120mm RGB Fans mentioned above. These RGB 140mm Fans come with the same features as their 120mm counterparts. The only difference is that the 140mm version offers greater airflow because of its bigger fan blades size.
Deepcool RF 140 RGB LED PWM Fan
It is the bigger brother of the above-mentioned Deepcool RF 120 RGB fan. Both have the same specifications and features except for higher airflow, lower RPM, and slightly different noise levels in this 140mm RGB fan. Below are the major specifications of this Deepcool 140mm RGB LED fan.
| Deepcool RF 140 RGB LED Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Hydro bearing |
| Fan Speed | 500 to 1200 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 56.5CFM |
| Noise Level | 19.8~24dB(A) |
| RGB Lighting Type | Transparent Fan Blades (6 RGB LEDs) |
| Features | PWM control, 6 RGB LEDs, Asus AURA Sync Compatible, Anti-vibration rubber design, Intelligent PWM functions, Multiple RGB Lighting modes, RGB Cable controller, Balanced airflow and air pressure design |
Buy Deepcool RF 140 RGB LED Fan
Corsair ML140 PRO RGB LED Magnetic Levitation Fan
Corsair ML140 is the 140mm version of the above-mentioned Corsair ML120 fan. Corsair ML140 has got the same features as in Corsair ML120 but it comes with lower RPM, higher airflow, and lower noise. You can find the complete specifications of this Corsair ML140 PRO 140mm RGB LED fan below.
| Corsair ML140 PRO RGB LED Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Magnetic Levitation |
| Fan Speed | 400 – 1200 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 55.4 CFM |
| Noise Level | 20.4 dBA |
| RGB Lighting Type | Transparent Fan Blades |
| Features | PWM Controlled, 4 RGB LEDs, RGB Lighting Effects using Corsair Link Software, RGB lighting hub, Lighting Node PRO, Rubber Corners |
Buy Corsair M140 Pro RGB LED Fan
NZXT Aer RGB LED 140mm Case Fan
It is the 140mm variant of the above-mentioned NZXT Aer RGB 120mm fan. This NZXT Aer RGB LED 140mm fan comes with a much greater airflow of 91.19 CFM compared to the 120mm sibling. Other specifications of this fan remain exactly the same including fan speed and noise levels.
| NZXT Aer RGB LED 140mm Case Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Fluid Dynamic Bearing (FDB) |
| Fan Speed | 500 – 1500 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 91.19 CFM |
| Noise Level | 22 – 33 dBA |
| RGB Lighting Type | RGB LED Ring (8 RGB LEDs) |
| Features | HUE+ and CAM-compatible, RGB LED Lighting effects, Uniform light dispersion with unique light guide design, 10 Lighting effects, Rubber Corners |
Buy NZXT Aer RGB LED 140mm Case Fan
Corsair LL140 RGB 140mm Dual Light Loop Case Fan
Corsair LL140 RGB Case fan is the 140mm variant of the Corsair LL120 RGB fan with higher airflow and lower fan speed. The features of both fans remain the same. You can find its major specifications below in the table.
| Corsair LL120 RGB 140mm Case Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Hydraulic |
| Fan Speed | 600 – 1300 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 51.5 CFM |
| Noise Level | 25 dBA |
| RGB Lighting Type | Dual light loop RGB LED, 16 RGB LEDs |
| Features | PWM Controlled, Amazing Dual Light Loop RGB LED Effects, Corsair Link software integration, transparent fan blades, CORSAIR Lighting Node Pro |
Buy Corsair LL140 RGB Dual Light Loop Fan
Fractal Design Prisma AL-14 PWM
[High-Performance RGB Fan for Radiators]
Fractal Design Prisma AL-14 PWM is the 140mm version of the above-mentioned Fractal Design Prisma AL-12 PWM fan. This 140mm PWM RGB fan comes with the same features, design, specifications, and Addressable RGB LEDs, but has a different fan speed and offers a bit more airflow but a bit less static pressure. The fan spins at 500 – 1700 RPM and generates high airflow of 103.85 CFM and high static pressure of 2.38 mmH2O, which are commendable figures. This 140mm RGB fan can be used with radiators, PC case (as a case fan), and a CPU heatsink fan because of its high airflow and static pressure performance. Just like its 120mm variant this fan comes with anti-vibration rubber pads, sleeved cables, supports Asus AURA, Gigabyte Fusion, MSI Mystic Light, and ASRock Polychrome, and also supports daisy-chaining.
Note: A 3-pin model of this fan is also available as Fractal Design Prisma AL-14, which is quieter (19.4 dBA) at the expense of performance. It has a constant speed of 1000 RPM and generates airflow of 63.33 CFM and static pressure of 1.07mm H2O. You can check both the variants out from the links given below and you save some money by going for the 3-pack offering.
| Fractal Design Prisma AL-14 PWM Specifications | |
| Fan Size | 140mm |
| Bearing Type | LLS (Long Life Sleeve) bearing |
| Fan Speed | 500 – 1700 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 103.85 CFM |
| Noise Level | 34.1 dBA |
| RGB Lighting Type | Fan Blades & Ring (6 ARGB LEDs) |
| Features | Black Sleeved Cable, supports Asus AURA, Gigabyte Fusion, MSI Mystic Light, and ASRock Polychrome, Trip Wire technology for enhanced Blade efficiency, Anti-vibration rubber pads on corners, supports daisy-chaining |
Buy Fractal Design Prisma AL-14 PWM
Buy Fractal Design Prisma AL-14 PWM [3-Pack]
Buy Fractal Design Prisma AL-14 (3-Pin)
Buy Fractal Design Prisma AL-14 3-pin [3-Pack]
Corsair HD140 RGB LED Case Fan
Corsair HD140 is the 140mm version of the above-mentioned Corsair HD120 RGB fan having the same features, and specifications but with higher airflow, lower fan speed, and slightly lower noise levels. You can check its specifications below.
| Corsair HD140 RGB LED Case Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Hydraulic |
| Fan Speed | 800 – 1350 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 74CFM |
| Noise Level | 18 – 28.6 dBA |
| RGB Lighting Type | Frame and Fan Blade, 12 RGB LEDs |
| Features | PWN Control, 3-button controller, high static pressure, transparent fan blades, 7 unique lighting modes |
Buy Corsair HD140 RGB LED Case Fan
Thermaltake Riing 14 LED RGB Radiator Fan
These are 140mm Thermaltake Riing 14 LED RGB Fans that come with higher airflow compared to the smaller Thermaltake Riing 12 LED RGB Fans. Other features and specifications remain the same including fan speed.
| Thermaltake Riing 14 LED RGB Fan Specifications | |
| Fan Size | 140mm |
| Bearing Type | Hydraulic |
| Fan Speed | 800 – 1400 RPM |
| Connector Type | 4-Pin |
| Maximum Airflow | 51.15 CFM |
| Noise Level | 19 – 28.1 dBA |
| RGB Lighting Type | RBG LED Ring, 256 Colors, |
| Features | PWM Control, Smart Fan Controller, RGB LED Lighting and Effects, Wind Blocker Frame, anti-vibration mounting system, Tt LCS Certified, rubber pads on corners, patented design, concentrated compression blade, high static pressure fan |
Buy Thermaltake Riing 14 LED RGB Radiator Fan
Phanteks Halos RGB Fan Frame
If you want to make any 120mm or 140mm case fan RGB then you can do so by using this Phanteks Halos RGB Fan Frame. This RGB Fan Frame consists of an RGB LED Ring that illuminates the fan blades and other areas. It comes with a 4-pin RGB connector that can be used with only a Phanteks RGB controller or accessory. To use it on a motherboard with a traditional 5050 RGB header, you have to buy a Phanteks RGB LED 4 Pin-Adapter cable with a standard 5050 RGB connector.
You can also daisy chain them using a single RGB connector. Phanteks Halos RGB Fan Frame is compatible with Asus Aura Sync, MSI Mystic Light Sync, and Gigabyte RGB Fusion RGB software. It is a great product to make your favorite case fan light up with RGB lighting.
P.S. – The Lux versions of this RGB Fan Frame i.e Phankteks Halos Lux RGB Fan Frame come with a 4-pin adapter cable with a 5050 RGB connector. They also have their main cable braided.
| Phanteks Halos RGB Fan Frame Specifications | |
| Size | 120mm / 140mm |
| No. of LEDs | 18 LEDs (120mm), 21 LEDs (140mm) |
| Connector | Phanteks 4-Pin RGB Header |
| Features | Compatible with Asus Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion RGB software |
Buy Phanteks Halos RGB Fan Frame (120mm)
Buy Phanteks Halos RGB Fan Frame (140mm)
Buy Phanteks RGB LED 4 Pin-Adapter Cable
Best Budget RGB Fans [120mm]
Here are the best budget RGB Case Fans packs for users on a budget. These RGB LED fans are from brands that are mostly unheard of but offer good RGB fans having good performance and features for the price.
Pccooler 120mm RGB Fan Moonlight Series
[Great Value for Money, Looks Amazing]
A pretty good 120mm ARGB for the price from Pccooler. The fan comes with dual light loop RGB rings that look very nice when lit up. This is a PWM fan that comes with hydraulic bearing for reliability and long life and spins at speed of 1000- 1800 RPM. The fan is 12V and requires a 4-pin PWM connector and the ARGB LED requires a 5V 3-pin connector from the motherboard or the RGB controller. The fan has got 18 LEDs with 5 brightness levels, 6 lighting modes, and 7 different colors. The LEDs are pretty bright and look amazing with all color-changing effects.
The fan generates a healthy airflow of 54.51 CFM and is very silent in operation, with a maximum noise level rating of 19 dBA only. It has got eight shock-absorbing rubber pads on all corners to reduce vibrations and the noise due to it. The build quality of the fan is also very good, and it has a rated lifetime of 30,000 hours. These fans are also available in a pack of three and are suitable for water cooling radiators and as case fans. You may also use them on CPU Cooler as they offer good performance. They are pretty cheap compared to RGB fans from other popular brands. A wired RGB controller comes bundled with these fans (3-pack). Highly Recommended by me.
| Pccooler 120mm RGB Fan Moonlight Series Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic bearing |
| Fan Speed | 1000 – 1800 RPM |
| Connector Type | 4-Pin PWM |
| Maximum Airflow | 54.51 CFM |
| Noise Level | 19 dBA |
| RGB Lighting Type | Dual RGB LED Ring |
| Features | Dual Light Loop Design, Wired RGB controller, Intelligent Speed Control |
Buy Pccooler 120mm RGB Fan Moonlight Series
upHere Wireless RGB LED 120mm Case Fans
[Best Value RGB Fans]
These are one of the cheapest RGB fans that you can find in the market. However, they are pretty well made and perform very well for their price. The fan comes with 8 RGB LEDs that are quite bright and they shine through the white fan blades. The fan does not compromise on quality and it comes with Fluid Dynamic Bearing (FDB) and spins at a speed of 1100 RPM. It generates a good amount of airflow at 56.27 CFM and is decently quiet at 23.9 dBA. The static pressure generated by the fan is 1.59 mmH2O, which is quite good.
It also includes anti-vibration rubber pads on the corners for shock absorption, and to eliminate vibrational noise. For connectivity, it uses a 6-pin connector and comes with a wireless remote controller and RGB fan hub. Using the wireless remote, you can control the fan brightness, lighting effects, and colors and can also start and stop them. The fan can be used as a case fan (both intake and exhaust) and on radiators as well. It is available in a pack of five at a price that is very hard to beat.
| upHere Wireless RGB LED 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Fluid Dynamic Bearing |
| Fan Speed | 1100 RPM |
| Connector Type | 6-Pin |
| Maximum Airflow | 56.27 CFM |
| Noise Level | 23.9 dBA |
| RGB Lighting Type | RGB Fan Blades |
| Features | Wireless RGB Controller / Remote, RGB Fan Hub |
Buy upHere Wireless RGB LED 120mm Case Fans
ID-COOLING ZF-12025-PINK
[Unique Pink Color Design, Good Performance & Build Quality]
A pretty looking RGB fan in Pink color that not only looks great but also delivers in the performance department. The fan has good build quality and has a white color frame with pink color fan blades. The fan uses Addressable RGB LEDs that light up the RGB ring integrated into the frame. It is a 120mm fan that comes with Hydraulic bearing and spins at a speed of 900 – 2000 RPM. The fan generates airflow of 55.2 CFM and static air pressure of 2.13 mmH2O. These are very good figures, and because of them, the fan can be used both as a case fan and a radiator fan.
When it comes to noise, it is not that loud and not that silent and falls in the average zone. The maximum noise level rating for the fan is 33.5 dBA. To keep the noise levels minimum, it also uses rubber pads at the corner to reduce the noise generated by vibrations. The fan comes with a 4-pin PWM connector and a 3-pin 5V ARGB connector for ARGB LEDs. The ARGB lighting supports Asus Aura Sync, Gigabyte RGB Fusion, and MSI Mystic Light Sync, using the motherboard’s software via a 3-pin ARGB header. Overall, a beautiful and fancy RGB fan that is quite affordable and offers good performance too.
| ID-COOLING ZF-12025-PINK Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic Bearing |
| Fan Speed | 900 – 2000 RPM |
| Connector Type | 4-pin PWM / 3-pin ARGB |
| Maximum Airflow | 55.2 CFM |
| Noise Level | 16.3 – 33.5 dBA |
| RGB Lighting | RGB LED Ring (ARGB) |
| Features | Supports Asus Aura Sync / Gigabyte RGB Fusion / MSI Mystic Light Sync, Anti-Vibration Rubber Pads on Corners |
Buy ID-COOLING ZF-12025-PINK ARGB Fan
AsiaHorse Solar Eclipse III 120mm RGB Fan
AsiaHorse is a weird-sounding brand name but it does offer affordable and feature-rich RGB Fans for use in PC Cases, CPU Coolers, and Radiators for Water Cooling. Here we have AsiaHorse Solar Eclipse III 120mm RGB Fan that comes with hydraulic bearing for reliability and silent operation. It is a pretty quiet RGB fan that has a maximum noise level rating of 16.8dBA and offers 25.5 CFM Airflow, which is rather on the lower rise. The fan spins at a maximum speed of 1200 RPM and has got silica gel pads at the corners for shock absorption and noise reduction. These AsiaHorse RGB Fans look somewhat similar to the popular Thermaltake Riing RGB Fans.
The fan has three RGB LED Rings and the color of these rings can be changed from a wireless remote that comes bundled with it. These fans feature the Music Interactive Function, where the Remote Controller provides three modes of music adjusting light effect, Lighting Effect Change Includes music beat to breathe, music speed to Neon-Flex speed, and Music to RGB. It uses a 6-Pin connector to connect to the RGB DC power supply box for RGB multi-color lighting. It offers good performance and amazing value for your money. These fans are best suited for use in radiators and as case fans. So, if you are looking for budget RGB PC fans then you will not be disappointed at all. It also comes in a pack of three and five with an RGB Remote control. You can check out these RGB fans from the link given below.
Note: If you want more RGB lighting then you can get AsiaHorse Nebula 120mm RGB Fan that has got RGB lighting on the fan blades (diffused) and around it as Ring too. Other specifications of this fan remain the same as the Solar Eclipse III fan. You can also check it out from the links given below.
| AsiaHorse Solar Eclipse III 120mm RGB Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydraulic |
| Fan Speed | 1200 RPM |
| Connector Type | 6-Pin |
| Maximum Airflow | 25.5 CFM |
| Noise Level | 16.8 dBA |
| RGB Lighting Type | RGB LED Ring (Triple Ring) |
| Features | Rubber Corners, Wireless Remote Control, 20000 Hrs. long life (claimed), Unlimited color transformation, Music Interactive Function, AI Control Hub, Game linkage mode |
Buy AsiaHorse Solar Eclipse III 120mm RGB Fan
Buy AsiaHorse Nebula 120mm RGB Fan
Aigo RGB LED 120mm Case Fan
Another budget RGB fan for computer cases and CPU water cooling radiators. Aigo is a Chinese company that manufactures computer cases, computer peripherals, and consumer electronics. Aigo RGB LED consists of a single thick RGB LED Ring on one side unlike dual RGB LED rings found in the above-mentioned AsiaHorse RGB fan. This is a 120mm fan that has got a relatively slower RPM of 1300 RPM and a maximum noise level of 23.5 dBA, which is on the silent side. Because of relatively lower RPM, these RGB fans push slightly less air which may be a concern for some users.
The fan has transparent fan blades and comes in a pack of three and an RGB controller by which you can change colors, various lighting effects, and the speed of the fans. You can connect up to 10 fans on this fan controller. These RGB fans come with fluid dynamic hydraulic bearing for longer life and rubber corners to avoid shocks and vibrations when in contact with the computer case. These RGB fans got a 6-pin connector and a 4-pin connector for the DC power supply. The quality of these RGB case fans is quite good and they look very nice inside your PC case or on your radiators. Overall, great budget RGB fans that are quite reliable and look great with awesome lighting effects.
| Aigo RGB LED 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Fluid Dynamic Bearing (Hydraulic) |
| Fan Speed | 1300 RPM ±10% |
| Connector Type | 6-Pin (for Fan), 4-Pin (for DC power supply) |
| Maximum Airflow | 38CFM |
| Noise Level | 23.5 dBA |
| RGB Lighting Type | RGB LED Ring |
| Features | 50+ LED light modes, 3 -button Fan controller, Transparent Blades, Rubber Corners, 20000 hours of life |
AMZtronics RGB LED 120mm Case Fan
AMZtronics is a Chinese company and here we have 120mm RGB LED fans from it. These RGB Fans look almost the same and have nearly the same specifications as the Aigo RGB fans mentioned above having the same RGB LED Ring type, but these AMZtronics RGB fans have black blades instead of the transparent blades found in the Aigo fans. These RGB fans come with hydraulic bearing and a 6-pin connector.
These are high airflow RGB fans that are pretty quiet in operation and have got relatively lower 1300 RPM. This also means they push a bit less air as their RPM is a bit on the low side but they are quieter in operation. You can connect 8 RGB fans synchronizing with color to the RGB fan controller and can also adjust their speeds and lighting effects. These RGB fans can be used in Computer Cases, CPU Coolers, and Radiators. They are pretty affordable and they come in a pack of three. Overall value for money RGB fans that looks amazing with their RGB LED lighting. You can check them out by going to the link given below.
| AMZtronics RGB LED 120mm Case Fan Specifications | |
| Fan Size | 120mm |
| Bearing Type | Hydro bearing |
| Fan Speed | 1300 RPM ±10% |
| Connector Type | 6-Pin connector |
| Maximum Airflow | 33CFM |
| Noise Level | 23.5dBA |
| RGB Lighting Type | RGB LED Ring |
| Features | Fan controller, 20000Hrs Life, Rubber Corners, Silicone shockproof and noise reduction design, adjustable led lighting effects, 59cm cable & backside management |
Buy AMZtronics RGB LED 120mm Fan
Other Budget RGB 120mm Fans
See also:
- Best Silent PC Fans[120mm & 140mm Quiet Fans]
- Best High CFM 120mm and 140mm Case Fans
- Best 200mm Case Fan for PC Cooling
- Best RGB PSUs for Gaming PC
- Best Slim 120mm Case Fans for SFF Cases & Heatsinks
- Best Slim 140mm Case Fans for SFF Cases & Heatsinks
- Best 92mm Fans for Cases & CPU Heatsinks
Final Words
RGB LED fans look amazing and they add style, beauty, and a fashion statement to your gaming PC or enthusiast build. The above-mentioned RGB fans are from different budget ranges, have different RGB LED styling/placements/lighting effects, and come with different sets of features and cooling performance. If you have any queries about selecting the right RGB fan for your computer case or radiator then you can ask me your doubts by leaving a comment below.
(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)
![Best Budget Z690 Motherboards for Intel 12th Gen CPUs [DDR4 Models]](https://graphicscardhub.com/wp-content/uploads/2021/12/MSI-PRO-Z690-A-DDR4-211x150.jpg "Best Budget Z690 Motherboards for Intel 12th Gen CPUs [DDR4 Models]")
![Top AMD Ryzen 3 Processors for Budget Gaming PC [Specs & Comparison]](https://graphicscardhub.com/wp-content/uploads/2017/07/amd-ryzen-3-processor-211x150.jpg "Top AMD Ryzen 3 Processors for Budget Gaming PC [Specs & Comparison]")
RGB fans, mice, keyboards, mousepads, cases, this is getting out of hand man hahaha.