If you are a professional and do a lot of components testing, hardware testing, overclocking, or benchmarking then you need a good PC test bench case for it. A PC Test Bench is generally an open-air computer case or a modular computer case with removable trays for easily installing and removing components. Most of the computer test bench cases are open frame cases and they also do not require fans for cooling because of the open-air case design they already have good airflow or ventilation. However, some of the test bench cases may offer optional fan mounting points for added cooling and increasing airflow.
A test bench case should be strong and sturdy because you will be installing and removing components most of the time and it should be able to handle this abuse. Also, it should be big enough to fit all the high-end components that include big and bulky CPU Coolers (both Air & Liquid CPU Coolers), high-end graphics cards, high-end power supplies, and other expansion cards or components. Another quality that a good test bench case should possess is the ease of use i.e. you do not have to put extra effort to install/remove components. The size of a PC test bench case may vary depending on the motherboard size as some PC test bench supports up to ATX size motherboards and some can go up to bigger E-ATX motherboards. Here in this post, I am going to list down some of the good PC Test Bench Cases for testing purposes.
Must Read:
- Best Super Tower Cases for Workstation & Enthusiasts
- Best High Airflow PC Cases for Gaming and Enthusiasts
- Best Water Cooling PC Cases for Gaming and Overclocking
Top PC Test Bench Cases for Professionals
Here are some of the best computer test bench cases for PC hardware testing, overclocking, and benchmarking of components.
Lian Li PC-T60 Test Bench Case
Lian Li PC-T60 is one of the most popular test bench cases around. This is a solidly built test bench case having an open design. This is an ideal case for hardware testing and supports up to ATX-sized motherboards. The case has got separate space for power supply (ATX PS/2) and it supports 5.25”, 3.5”, and 2.5” inch drives. It has got 8 expansion slots and there is no limit for CPU cooler height and graphics card length. For I/O ports, you have to get a separate card for it that comes with an e-SATA port, two USB 3.0 ports, and audio ports. In this test bench case, a trestle can be easily set up with thumb screws, to give the back-end of the T60 Test Bench additional stability. It also allows you to install two 120mm/140mm case fans if you need additional cooling.
This PC test bench comes unassembled and you have to assemble it yourself by looking at the instructions given in the manual that comes with it. Once set up, it is very user-friendly and you can easily install, switch and remove components for testing purposes. So, if you are looking for a strong, sturdy, spacious, affordable, feature-rich, and easy-to-use flexible PC test bench case then you should definitely for it. Highly Recommended by me.
| Lian Li PC-T60 Test Bench Case Specifications | |
| Form Factor | ATX Test Bench |
| Motherboard | Micro-ATX, ATX |
| Drive Bays | 5.25” x 2, 3.5” x 2, 2.5” x 2 |
| Front Ports | USB 3.0 x 2, e-SATA x 1, Audio Ports [Optional] |
| Expansion Slots | 8 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | 120mm or 140mm Fans x 2 (optional) |
| Features | Trestle for PCI Card Stability, Open Design, Aluminum Construction, Rubber Pads for PSU and HDDs |
Buy Lian Li PC-T60 Test Bench Case
Cooler Master HAF XB EVO Cube Case
Cooler Master HAF XB EVO is a multipurpose cube case that can be used as an HTPC case, LAN Party case, compact gaming case, and also as a test bench case. This is a compact case but still offers loads of space for all your high-end components whether for testing or for building a powerful compact PC. This PC cube case has got removable HDD / ODD cages and a removable motherboard tray that makes it ideal for use as a test bench case. This case supports up to ATX motherboards and comes with two 120mm XtraFlo fans on the front for cooling, and you can optionally install fans at top and rear too. The case exhibits good build quality and on the front panel, it has got two USB 3.0 ports, audio ports, and two X-dock bays for 3.5”/2.5” drives.
The case can accommodate 334mm long graphics cards, 180mm tall CPU coolers, and a 240mm radiator for liquid cooling. It supports drive bays of all sizes and a standard ATX PS2 Power Supply. Other features include rigid carry handles for easy transportation and slide-out dust filters. It may not be a traditional open design type test bench case but it is a complete all-rounder and comes in pretty handy for every type of situation. So, if you are looking for a test bench case that can be used for different purposes then this will definitely suit you.
| Cooler Master HAF XB EVO Cube Case Specifications | |
| Form Factor | ATX Cube Case |
| Motherboard | Mini-ITX, Micro-ATX, ATX |
| Drive Bays | 5.25” x 2, 3.5” / 2.5” x 4 |
| Front Ports | USB 3.0 x 2, Audio |
| Expansion Slots | 7 |
| CPU Cooler Height | 180mm |
| Graphics Card Length | 334mm |
| Fans / Cooling | Top: 200mm fan x 1 (optional)
Front: 120mm XtraFlo fan x 2 (installed; 1200 RPM, 17 dBA), or 140mm fan x 2 (optional) Rear: 120mm fan x 1 or 80mm fan x 2 (optional) |
| Features | Carry Handles, Removable HDD / ODD cages, Removable Motherboard Tray, Two X-Dock Bays, Removable Dust filters, 240mm Radiator support, Mesh top Panel |
Buy Cooler Master HAF XB EVO Case
Cooler Master MasterFrame 700
[Can be used as Open Air Case or Test Bench, Premium Looks & Build Quality]
Cooler Master MasterFrame 700 is a unique modular case that can function either as an open-air case or a premium test bench. It is a modern & stylish-looking case and supports up to SSI EEB motherboards. The case comprises a center frame where the motherboard is mounted and two side wings attached to it using heavy-duty hinges. Vertically, the case functions as an open-air case with a tempered glass panel at the front. In this configuration, you can mount two 360mm radiators on the side hinges. The case includes the support for custom water-cooling and has got separate mounts for the pump and reservoir. Laying down horizontally, the case converts to a premium test bench where you can add an extra 420mm radiator, just behind the CPU socket.
The I/O ports include two USB 3.1 Gen 2 Type-A ports, one USB 3.2 Gen 2 Type-C port, and audio ports. In the open-air design mode, CPU cooler height clearance is 158mm, and graphics card length clearance is 450mm. However, in the test bench mode, there is no restriction on CPU height and GPU length clearance. When it comes to storage then you can add up to four 3.5-inch drives and up to seven 2.5-inch drives. The case is VESA mount compatible and you can wall mount it to save space or to allow the full display of your high-end components. So, if you are looking for a dual functionality case that is strong and has a unique appeal then just grab it because you won’t be disappointed.
| Cooler Master MasterFrame 700 Specifications | |
| Form Factor | Open Air / Test Bench |
| Motherboard | SSI EEB, SSI CEB, XL-ATX, E-ATX, ATX, Micro ATX, Mini ITX |
| Drive Bays | 2.5” / 3.5” x (Up to 4 (PSU cover)), 2.5” x 7 (3 SSD brackets + 4 PSU cover) |
| Front Ports | USB 3.1 Gen 2 Type-A x 2, USB 3.2 Gen 2 Type-C x 1, Audio Ports |
| Expansion Slots | 8 |
| CPU Cooler Height | 158mm (open air mode) / Unlimited (test bench mode) |
| Graphics Card Length | Up to 450mm (open air mode) / (test bench mode) |
| Fans / Cooling | Right Side: 120mm x 3 / 140mm x 2
Left Side: 120mm x 3 / 140mm x 2 |
| Features | Up to 360mm (open-air mode)/420mm (test bench mode) Radiator support, Cable Routing, Dual ATX PSU support, Tempered Glass Front Panel (Open Air Mode), Custom Water Cooling support, VESA mount compatible |
Buy Cooler Master MasterFrame 700
HighSpeed PC Half-Deck Tech Station Standard (ATX)
This is a traditional open-frame design test bench case from a company called HighSpeed PC which specializes in open-air test bench cases. PC Half-Deck Tech Station is a test bench case that supports up to ATX size motherboards. The case comes with a 120mm fan for motherboard and HDD cooling. The case is divided into two platforms or benches, the upper one is for the motherboard and add-in cards while the lower one is for hard drives, optical drive, and power supply. There is no restriction on CPU cooler height and graphics card length because of its open-air frame design.
The case has good build quality and it is surprisingly easy to work with. Installing and removing components is a breeze on this test bench case. The case comes with all the required screws, rubberized pads, 120mm fan and other connectors that you will need to assemble or install components on this test bench case. It is also very affordable and gets a thumb up from me.
| HighSpeed PC Half-Deck Tech Station (ATX) Specifications | |
| Form Factor | ATX Test Bench |
| Motherboard | Mini-ITX, Micro-ATX, ATX |
| Drive Bays | 3.5” x 2 / 2.5” x 3 |
| Front Ports | NA |
| Expansion Slots | 7 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | 120mm x 1 |
| Features | Anti-Static Neoprene Mat for non-slip under bench storage surface, Secure rubberized motherboard standoff system, Add-in card support with 7 thumb screws |
Buy HighSpeed PC Half-Deck Tech Station (ATX)
HighSpeed PC Half-Deck Tech Station Large (E-ATX)
This is the bigger version of the above-mentioned HighSpeed PC Half-Deck Tech Station Standard (ATX) test bench case. It supports up to Extended ATX (E-ATX) sized motherboards while other features remain the same as in the ATX variant. You can check out the specifications and features of this HighSpeed PC Half-Deck Tech Station Large (E-ATX) below. This is a very good test bench case for someone who wants to use E-ATX or lower-sized motherboards but it does eat away extra space with its slightly bigger size or dimensions.
| HighSpeed PC Half-Deck Tech Station Large Specifications | |
| Form Factor | E-ATX Test Bench |
| Motherboard | Mini-ITX, Micro-ATX, ATX, E-ATX |
| Drive Bays | 3.5” x 2 / 2.5” x 3 |
| Front Ports | NA |
| Expansion Slots | 7 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | 120mm x 1 |
| Features | Anti-Static Neoprene Mat for non-slip under bench storage surface, Secure rubberized motherboard standoff system, Add-in card support with 7 thumb screws |
Buy HighSpeed PC Half-Deck Tech Station (E-ATX)
DIYPC Alpha-GT3 Test Bench Case
DIYPC Alpha-GT3 is an open-style test bench case that can be used for testing, overclocking, and benchmarking. This is a high-quality test bench that supports up to ATX-sized motherboards. The case supports 5.25-inch, 3.5-inch, and 2.5-inch drives and comes with an I/O port that consists of two USB 2.0 ports and Audio ports. It is very easy to assemble and mount components on this case and has got enough space for all of your high-end components. There is also no restriction on the height of CPU coolers and graphics card length. So, if you are looking for a durable and no-nonsense open-style test bench case then give this one a try.
| DIYPC Alpha-GT3 Test Bench Case Specifications | |
| Form Factor | ATX Test Bench |
| Motherboard | Micro-ATX, ATX |
| Drive Bays | 5.25” x 1. 3.5” x 3, 2.5” x 2 |
| Front Ports | USB 2.0 x 2, Audio |
| Expansion Slots | 7 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | NA |
| Features | Easy to assemble, Spacious |
Buy DIYPC Alpha-GT3 Test Bench Case
InWin X-Frame 2.0 Test Bench Case
InWin X-Frame 2.0 is one of the best open-frame test bench cases that you can get for testing and overclocking. The case is on the expensive side but it is worth every penny if you are a professional. This is a high-quality and modern test bench case that comes with features that you won’t find in other test bench cases. The case comes with a rotating stand that can be rotated 360 degrees and can be mounted horizontally and vertically. The case allows space for three 120mm fans for increasing airflow or cooling. The front part of the comes with three USB 3.0 ports, one USB Type-C port, and HD audio ports.
The case has no limits on CPU cooler height and graphics card length and supports a 360mm radiator for liquid cooling. It also has a mounting bracket for a water pump for custom liquid cooling solutions. The case comes bundled with InWin SI-1065W power supply which is a modular PSU having a 1065W capacity. Overall a high-quality open-frame case that has good build quality and is high on features.
| InWin X-Frame 2.0 Test Bench Case Specifications | |
| Form Factor | Open-Air Chassis |
| Motherboard | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Drive Bays | 1 x 5.25”, 3 x 2.5″/3.5”, 3 x 3.5″, 7 x 2.5″ |
| Front Ports | USB 3.0 x 3, USB 3.1 Type-C x 1, HD Audio |
| Expansion Slots | 8 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | 120mm x 3 (Side) |
| Features | 360-degree rotating stand, Horizontal / Vertical mounting, SI-1065W power supply included, 360mm radiator support, Water Pump bracket |
Buy In-Win X-Frame 2.0 Test Bench Case
Lian Li PC-T70 Test Bench Case
Here we have Lian Li PC-T70 which is an ultimate test bench for professionals. This test bench case supports up to E-ATX size motherboards and comes with various advanced features. For cooling, you can install two 140mm or three 120mm fans and on the front panel, you will get three USB 3.0 ports and HD Audio ports. The case supports 3.5” and 2.5” inch drives but lacks support for 5.25” drives. The case is modular in design and with the snap-on panels, it can rapidly convert from bench to case and back.
The case is liquid cooling ready and supports 360mm radiators. However, there is no restriction on the CPU cooler height and graphics card length. Other features include cable management and panels with magnetic strips. Overall a solid test bench case for hardware enthusiasts and professionals.
| Lian Li PC-T70 Test Bench Case Specifications | |
| Form Factor | Test Bench E-ATX |
| Motherboard | Micro-ATX, ATX, E-ATX |
| Drive Bays | 3.5” x 1 + 2.5” x 5 or 3.5” x 2 + 2.5” x 1 |
| Front Ports | USB 3.0 x 2, HD Audio |
| Expansion Slots | 8 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | 140mm x 2 / 120mm x 3 (optional) |
| Features | Cable Management, Modular Design, 360mm Radiator support, |
Buy Lian Li-PC-T70 Test Bench Case
Praxis WetBench
Praxis WetBench is a very nice-looking test bench from Primochill. With its slanted motherboard posture, you can easily install and remove components with much better control, and it also provides greater comfort & convenience for testing work. This is an ATX sized test bench that can support up to E-ATX sized motherboards. For storage, it supports up to four 3.5-inch hard drives (HDD/SSD), and two 5.25-inch drives, and has got 8 expansion slots.
It is a water-cooled ready test bench and supports up to 360mm / 280mm radiators, and up to 300mm long PSU. There are no limitations on CPU cooler height and graphics card length. The test bench is pretty sturdy and has a steel body construction. Also, it is very easy to use and is available in multiple color options. Highly Recommended by me.
| Praxis WetBench Specifications | |
| Form Factor | ATX Test Bench |
| Motherboard | Mini-ITX, Micro-ATX, ATX, E-ATX |
| Drive Bays | 4 x HDD/SSD (up to 3.5″ supported) |
| Front Ports | NA |
| Expansion Slots | 8 |
| CPU Cooler Height | NA |
| Graphics Card Length | NA |
| Fans / Cooling | NA |
| Features | Up to 300mm PSU support, up to 360mm / 280mm Radiator support, Powder Coated Steel Frame. |
See also:
Final Words
So, whether you are a hardware tester, an overclocker, or a hardware enthusiast, these above-mentioned computer test bench cases are great for testing various hardware components and PC benchmarking. If you have any got queries or doubts then please ask them by leaving a comment below.
(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)
![Best Budget X470 Motherboards for Gaming [AM4 Socket]](https://graphicscardhub.com/wp-content/uploads/2018/04/Gigabyte-X470-AORUS-ULTRA-GAMING-Motherboard-211x150.jpg "Best Budget X470 Motherboards for Gaming [AM4 Socket]")
![Best Case Fan for PC Cooling [80mm, 120mm & 140mm Fans]](https://graphicscardhub.com/wp-content/uploads/2017/05/case-fan-pc-211x150.jpg "Best Case Fan for PC Cooling [80mm, 120mm & 140mm Fans]")
What I find insulting is that these open “cases” are more expensive than a regular case, that’s INSANE!
For people who doesn’t have a “money tree”, you can use a Motherboard tray from Dell Poweredge servers, you can fit any motherboard on them and with some tinkering you can do something similar with less than $50…
Or you can either custom built one that will also cost way less.
That’s due to these sorts of cases having a much smaller consumer base. When the manufacturer does not make many of the case it requires the manufacturer to spend more per batch due. Compared to regular cases where they make possibly 10-1000x as many due to the much larger consumer base.
Higher price is absolutely justified. These cases are built with much greater functionality and engineering than standard static cases. Couple that with a much smaller market as previous commenter stated, and it lends itself to a higher price. Pretty straightforward deduction honestly.