(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)
RGB Controller is a small device that is used to control the RGB lighting of your RGB devices (RGB Fans, RGB LED Strips, etc.) inside your PC case. It can do so either by using RGB software or by its hardware through buttons or remote control. They prove very useful in connecting multiple RGB devices, especially in cases where your motherboard does not have RGB headers or there are insufficient RGB headers to hook up your RGB components. The RGB Controller device is generally in the shape of a small rectangular box and is also known as RGB Control Box.
Unlike fan hubs, they do not power the case fans or control their speed, but only control the RGB lighting of the connected RGB devices and components. However, there are a couple of RGB Controllers that also power the fan, but most of these RGB Controllers work with their RGB products only, whether fans, LED strips, case lighting, etc. RGB Controller is a great device or component to have for older motherboards with no RGB support i.e. RGB headers. They can be easily fit in any case, and then you can hook up your RGB fans, RGB LED Strips or other RGB components to them. So, if you are looking for an RGB controller to spice up your PC case with fancy RGB lighting then stay connected, as here I am going to list down the top RGB LED controllers that you buy for your computer case.
Important Note: You must know that there are two types of RGB LED Devices, one with standard RGB LEDs that change one color at a time. They come with a 4-pin RGB connector and works on 12V. Another type is Addressable RGB LEDs or ARGB that can change to multiple colors independently of others and can create many more fancy lighting effects. They work with 5V and comes with a 3-pin ADD-RGB connector.
Best RGB Controllers [RGB & ARGB]
Here are the top RGB LED controllers for RGB Fans, RGB LED Strips and other supported RGB components and devices. These RGB controllers can be used with motherboards without RGB support or RGB headers.
[Easy to use, CM Software RGB Control]
A very simple and easy to use RGB LED Controller from Cooler Master for RGB Fans, RGB LED Strips etc. This is a low profile and compact RGB controller that comes with built-in magnets and fits easily inside your computer case. The controller offers four RGB ports that support 12V RGB Fans or RGB LEDs with a 4-pin RGB connector. However, you can attach two or more RGB Fans / LED Strips to the single port to extend the lighting via splitter cable. For power, the RGB controller uses one SATA power connector, and the communication interface used here is USB (9-pin connector) for working with the RGB software.
The various RGB lighting effects and customization can be done using the Cooler Master RGB Software only. It must be noted that this RGB controller is not compatible with other RGB softwares other than from its own. The RGB controller works with any RGB Fans and RGB LED Strips that has 4-pin (+12V-G-R-B) connector. The package includes RGB controller along with all the required adapter cables and connectors. So, if your motherboard lacks RGB support, but you want to use RGB Fans and RGB LED Strips in your PC case, then this RGB connector will serve your purpose very well. Highly Recommended by me.
|Cooler Master RGB LED Controller Specifications|
|Controller Type||RGB LED Controller (Non-ADD)|
|RGB Ports||4 Ports (4-pin)|
|Interface||USB 2.0 (9-pin)|
|Compatibility||12V RGB Fans & RGB LED Strips (4-Pin)|
|RGB Control Method||Cooler Master RGB Software|
|Features||Built-in Magnet, Low Profile design, Static, Breathing, Color Cycle, Stars, Customize, Multilayer, Turn LED off, Mirage (Frequency Control) Lighting Modes|
[Remote Control RGB Lighting & Fan Speed]
Here we have a multi-functional RGB controller from Silverstone that can be used to connect Addressable RGB devices and also Case Fans. It comes with six ports for 5V ARGB LED devices and four ports for 4-pin / 3-pin case fans. The power is fed into this device from a 4-pin Molex connector. It also includes a thermal sensor probe that connects to the device, and can automatically adjust the LED colors and Fan speed according to the temperature. The RGB Lighting / Effects and Fan speed can be controlled using a wireless remote, which can also be used to start or turn off your PC, if you connect the included power header to the motherboard, and to the device itself.
The device is compact and can be installed using the included adhesive and Velcro pads. The RGB Controller works as expected and provides a wireless approach to control your RGB LEDs and Fan speed. All the cables, sensors, adapters come included in the package with the device. It is compatible with Silverstone ARGB Fans (AP142-ARGB, AP124-ARGB) and ARGB LED Strips (LS03) only. The exact model number of this device is SST-LSB02.
|SilverStone Addressable RGB Control Box LSB02 Specifications|
|Controller Type||ARGB and Fan Speed Controller|
|RGB Ports||6 ports (3-pin)|
|Fan Ports||4-Pin x 4 (compatible with 3-pin)|
|Compatibility||5V ARGB Fans / LED Strips, 4-pin / 3-pin Fans|
|RGB Control Method||Remote Control|
|Features||Remote start or turn off PC, Temperature Sensor, Included Adhesive and Velcro Pads, compact|
A tiny ARGB Addressable RGB LED Controller from Cooler Master for motherboards that don’t have 5V ARGB headers. It is powered by the SATA power connector and supports up to three ARGB devices using 1 to 3 ARGB splitter cable. The ARGB controller has got three buttons/switches on it for various functions that include changing LED Lighting modes, LED Lighting speed, Thermal detection mode, and external addressable RGB through the supported motherboard.
The controller features 6 LED modes and 7 LED speed adjustment. If you connect it to the 5V ARGB header on the motherboard then you can control the lighting using the motherboard’s software by toggling a switch on the controller that bypasses the RGB connection. The controller is not compatible with any RGB software including the Cooler Master’s one. It has got integrated magnets that make it very to install in your PC case. All the necessary cables come included in the package with the RGB controller itself.
|Cooler Master Addressable RGB LED Small Controller Specifications|
|Controller Type||Addressable RGB Controller|
|RGB Ports||1 Port (5-pin)|
|Interface||Wired / Manual|
|Compatibility||ARGB Fans & Devices|
|RGB Control Method||Physical Buttons / Switch|
|Features||Compatible with Asus Aura Sync / MSI RGB Mystic Light Sync, 3-Button Remote control, Integrated Magnets|
[One of the Best ARGB Controllers, Universal Compatibility]
One of the best ARGB controllers out there in the market right now is the Razer Chroma Addressable RGB Controller. If you do not have a motherboard with ARGB headers but want the glory of ARGB lighting then you must have this ARGB controller. Razer Chroma Addressable RGB Controller is universally compatible with all ARGB devices having a 5V 3-pin ARGB connector. It comes with three 5V 3-pin ARGB ports and a USB port that connects to the motherboard USB 2.0 header using the supplied USB cable. The ARGB controller draws power from a single 4-pin Molex connector.
Razer Chroma Addressable RGB Controller supports Razer Chroma RGB and the ARGB lighting and customization can be controlled using the Razer Synapse 3 software. The software has good functionality, an easy user interface and includes various ARGB customization and lighting modes. You can sync and control the ARGB lighting of various ARGB devices in your PC including LED strips, fans, CPU coolers, PC cases, and more. The ARGB controller includes 2.5-inch SSD mounting points that allow to install it in an SSD bracket or bay. Highly Recommended!
|Razer Chroma Addressable RGB Controller Specifications|
|Controller Type||Addressable RGB Controller|
|ARGB Ports||3-pin 5V ARGB Ports x 6|
|Power Connector||Molex 4-pin|
|Compatibility||Universal Compatibility with standard 5V 3-pin ARGB devices|
|RGB Control Method||Razer Synapse 3 Software|
|Features||Universal compatibility to work with any ARGB device, SSD Mounting Points, Truly customizable lighting|
[Compact, SATA powered, Cheap]
A compact RGB controller and is an easy solution for anyone who does not have RGB headers on their motherboard, but has an RGB device or wants to buy one. It supports 12V 4-pin RGB Fans and Devices and draws its power from a SATA connector. This RGB SATA Controller has got two 4-pin RGB ports (12V) to connect your RGB devices. The RGB lighting, speed, and effects can be controlled using the three buttons located in the middle of the cable. It supports 20 Static Color Modes, 19 Dynamic Modes, 8 Brightness Settings. The cable for this RGB controller is sleeved and is pretty sturdy. It is one of the best ways to have a cost-effective solution to your RGB lighting needs.
|XSPC RGB Controller Specifications|
|Controller Type||RGB Controller (12V)|
|RGB Ports||2 Ports (4-pin 12V)|
|Interface||Wired / Manual|
|Compatibility||4-pin RGB Fans & Strips [12V]|
|RGB Control Method||Physical Buttons|
|Features||Compact Size, supports 20 Static Color Modes, 19 Dynamic Modes, 8 Brightness Settings|
An addressable RGB controller for NZXT Fans and LED Strips. It comes with four channels or ports that can support up to 40 LEDs or 6 accessories per channel (Up to four LED strips – 10 LEDs per strip / Up to five Aer RGB fans / Up to six HUE 2 accessories). The power to the device comes from a Molex connector, and the connectivity is established using a USB connector (9-pin to micro-USB).
The lighting and various effects are controlled by using the NZXT CAM software only. It is compatible with HUE+ LED strips and Aer RGB fans, but cannot be mixed with HUE 2 accessories in the same channel. The RGB Controller comes as a part of NZXT HUE 2 RGB Lighting Kit that contains four 300mm NZXT ARGB LEDs along with the controller itself. You can check out the NZXT HUE 2 RGB Lighting Kit by going to the link given below.
|NZXT HUE 2 RGB Lighting Controller Specifications|
|Controller Type||ARGB LED Controller|
|RGB Ports||4 Ports (4-Pin)|
|Interface||USB 2.0 (9-pin)|
|Compatibility||NZXT HUE+ LED strips and Aer RGB fans|
|RGB Control Method||NZXT CAM Software|
|Features||Supports up to 40 LEDs or 6 accessories per channel|
This is an Addressable RGB Controller and Fan Hub for Thermaltake Fans and other Thermaltake devices. It comes with nine ports (9-pin) for RGB devices and is powered by the SATA power connector. The controller is connected to the motherboard using USB (9-pin) cable. The RGB lighting and customization are controlled using the Thermaltake Riing Plus RGB software. Also, it supports other popular RGB softwares that include Asus Aura RGB Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome RGB through motherboard 5V ARGB header.
This Thermaltake TT Sync Controller is capable of handling up to 9 Thermaltake addressable LED products. The installation is easy, which can be done using the included Velcro straps. Also, all the cables for power/devices and other connections come included in the package along with the RGB controller. You can refer to the Thermaltake official website for checking out the complete list of products supported by this slim and compact Thermaltake RGB Fan Hub & Controller.
|Thermaltake TT Sync Controller TT Premium Edition Specifications|
|Controller Type||ARGB Hub Controller|
|RGB Ports||9 Ports (9-Pin)|
|Fan Ports||9 (shared with RGB port)|
|Interface||USB 2.0 (9-Pin)|
|Compatibility||Thermaltake RGB Fans, LED Strips & Devices|
|RGB Control Method||Motherboard RGB Software (Asus, Gigabyte, MSI), Thermaltake Riing Plus RGB software|
|Features||Support up to 9 Thermaltake Addressable LED Products, Sync with Motherboard RGB Software|
Here we have an Addressable RGB Controller from Phanteks that supports Phanteks D-RGB products, which include Halos (Lux) Digital and D-RGB LED Strips. The controller uses the SATA power connector for its working and comes with three ARGB ports (3-pin). The RGB Lighting Modes and effects on this controller can be controlled either by a 3-button remote control or through supported RGB Softwares via 5-pin motherboard header. You can daisy chain up to 7x (using remote) or 9x (connected to the motherboard) Phanteks’ D-RGB products.
It officially supports Asus, ASRock, and MSI 5-pin ARGB motherboard headers, but you can also use it Gigabyte Digital Pin Header using a Gigabyte D-LED adapter, which you have to buy separately. The controller is very small and lightweight, and can be attached easily inside the case using built-in magnets or by using double-sided tape that comes along with it. The RGB Controller comes with all the required cables and wired remote that you need to make it work.
|Phanteks Digital RGB Controller Hub Specifications|
|Controller Type||Addressable RGB Controller & Hub|
|RGB Ports||3 Ports (3-Pin)|
|Interface||3-pin ARGB / Manual|
|Compatibility||Phanteks D-RGB products|
|RGB Control Method||Motherboard Software / Wired Remote|
RGB Controller Hub
[Requires 5V /12V RGB Header on Motherboard]
RGB Controller Hubs are used to increase RGB connections with only one RGB header. This means if you have only one RGB header on your motherboard, but want to add multiple RGB Fans and RGB Strips then an RGB Controller Hub will allow you to do so. It turns one RGB header into multiple headers (4, 6, 8, etc.), depending on the device capability. The RGB lighting and effects on these RGB controller hubs are generally controlled using the motherboard’s RGB software. This also means that they only work with a motherboard with at least one supported RGB header, and if your motherboard does not have any RGB header then you cannot use them and have to use independent RGB Controllers only that I have mentioned above.
[5V to 12V RGB Transfer Hub]
Deepcool RGB Converter is a one-stop solution for all those users who have only 12V 4-pin RGB headers on their motherboard but want to use 5V ARGB (3-pin) devices. It is a 5V to 12V RGB Transfer Hub that allows you to use both ARGB and RGB Fans and LED Strips simultaneously. It is powered by a 5V SATA power connector and connects to the motherboard using a 12V 4-pin RGB connector. For output, it has got three 5V ARGB ports (3-pin) and two 12V RGB ports (4-pin), where you can connect your ARG and RGB devices.
This 5V to 12V RGB Transfer Hub+Converter is compatible with all the major motherboard brands (MSI, Asus, Gigabyte) and its RGB software that include MSI Mystic Light Sync, Asus Aura Sync, and Gigabyte RGB Fusion. This is a small lightweight device that has got a built-in magnet and comes with included Velcro strip for effortless and easy installation. The length of HUB Strip Cable is 600mm, which is long enough for most of the computer cases.
|Deepcool RGB Convertor Specifications|
|Input Power||SATA 5V|
|Input Port||4-pin(+12V-G-R-B) × 1|
|Output Port||4-pin(+12V-G-R-B) × 2, 3-pin(+5V-D-G) × 3|
[RGB Hub for 12V 4-pin RGB Connectors, SATA Powered]
This is a 12V RGB Hub or Splitter that takes one 12V 4-pin RGB connector as input and provides you eight 4-pin RGB headers for hooking up your RGB devices that include RGB fans, RGB LED Strips or other 12V RGB devices. It is very handy in situations when your motherboard has only one or two 12V 4-pin RGB headers, but you have a lot more RGB components and devices to connect to. For power, this RGB Splitter Hub uses one SATA connector from the PSU and can deliver a maximum total power output of 66W@5.5A.
This RGB Hub is compact in size and is only 15mm thick. For installation, it comes with an adhesive hook/loops pad, making it easy to mount it anywhere in your case. A sleeved RGB cable (12v 4-pin) comes included with it, having a length of 60cm. It is available in two colors: black or white.
Note: This RGB hub is not compatible with 3pin 5V addressable RGB headers or controllers.
|XSPC 8 Way, 4Pin, 12V RGB Splitter Hub Specifications|
|Input Power||SATA 12V|
|Input Port||4-pin(+12V-G-R-B) × 1|
|Output Port||4-pin(+12V-G-R-B) × 8|
[5V 3-pin ARGB Hub, SATA Powered]
This is a 5V ARGB Hub Splitter that takes one 5V 3-pin ARGB connector as input and provides you eight 3-pin ARGB connectors for hooking up your ARGB devices that include RGB fans, RGB LED Strips, etc. It is very handy in situations when your motherboard has only one or two 5V 3-pin RGB headers, but you have a lot more ARGB components or devices to connect to. For power, this ARGB Splitter Hub uses one SATA power connector from the PSU and can deliver a maximum total power output of 6.5A (32.5W).
The ARGB Hub is compact and is only 15mm thick. For installation, it comes with an adhesive hook/loops pad, making it easy to mount it anywhere in your case. A sleeved ARGB cable (5v 3-pin) comes included with it, having the length of 60cm. It is available in two colors: black or white.
|XSPC 8 Way, 3Pin, 5V RGB Splitter Hub Specifications|
|Input Power||SATA 12V|
|Input Port||3-pin 5V RGB × 1|
|Output Port||3-pin 5V RGB × 8|
|Cable Length||60 cm|
[Ten 5V 3-pin ARGB Output Ports, Stylish Multicolor Scheme]
A 10 port ARGB Hub controller from Thermalright that makes high-quality PC cooling components like Case Fans, CPU Coolers, Thermal paste, etc. The ARGB Hub has got one 5V 3-pin input ARGB port for synchronizing the signals at ten 5V 3-pin ARGB output ports. A SATA connector powers the ARGB Hub and you can attach the Hub inside the PC case using the included 3M tape. The ARGB Hub looks very stylish because of its shiny multicolor scheme.
|Thermalright ARGB HUB Controller Specifications|
|Input Port||5V 3-pin ARGB|
|Output Port||10 x 5V 3-pin ARGB|
[Ten 12V 4-pin RGB Output Ports]
A 10 port RGB Hub controller from Thermalright. The RGB Hub has got one 12V 4-pin input RGB port for synchronizing the signals at ten 12V 4-pin RGB output ports. A SATA connector powers the ARGB Hub and you can attach the Hub inside the PC case using the included 3M tape. The hub comes in metallic blue color.
|Thermalright RGB HUB Controller Specifications|
|Input Port||12V 4-pin RGB|
|Output Port||10 x 12V 4-pin RGB|
RGB Splitter Cables
Below are some RGB and ARGB splitter cables that let you connect multiple RGB / A-RGB devices using a single RGB / ARGB header on the motherboard.
4 Way LED RGB Splitter Cable
A 4-way RGB splitter Y cable for RGB motherboards, controllers, and devices that supports 4-pin 12V RGB connection.
Cooler Master A-RGB 1-to-3 Splitter Cable
Addressable RGB 1-to-3 Splitter Cable that lets you connect three A-RGB devices (Fans, LED Strips, etc.) using a single 3-pin ARGB motherboard header (5V). It supports Gigabyte, Asus, ASRock and MSI motherboards. The cable is flexible and is 58cm in length.
Cooler Master RGB 1-to-3 Splitter Cable
RGB 1-to-3 Splitter Cable that lets you connect three A-RGB devices (Fans, LED Strips etc.) using a single 4-pin RGB motherboard header (12V). It supports Gigabyte, Asus, ASRock and MSI motherboards. This RGB cable is compatible with both 5-pin RGBW header and 4-pin RGB header without requiring any adapter. The cable is flexible and is 58cm in length.
Other RGB Controllers
Here are some other RGB controllers that you can also check out.
- Best RGB PC Case for Gaming
- Best RGB Power Supplies for Gaming PC
- Best RGB CPU Coolers [Air & Liquid]
- Best RGB RAM for Gaming PC [DDR4]
RGB Controller comes in very handy to add multiple RGB LED devices inside your PC Case. Some of the RGB LED controllers to work with their own RGB products only as their use proprietary connectors, while some of the RGB Controllers do support standard RGB devices (Fans / LED Strips) with standard RGB connectors. If you have any confusion regarding the compatibility of these RGB controllers with your RGB components or have any other doubts, then you can ask your queries here by leaving a comment below.