Best Inverted PC Case in 2024 [ATX & Micro-ATX Computer Cases]

An inverted PC case is a computer case that has an inverse layout design, which means the motherboard and components in it are installed upside down (facing down), which is opposite to the traditional way of mounting components, which is in an upright manner. In this inverse layout, all your expansion slots will be on the top and the I/O shield and ports will be at the bottom. The placement of PSU depends on the case, but in most of these inverse cases, it is on the top. There are different types of inverted PC cases, which are mentioned below.

Types of Inverted PC Cases

Here are various types of inverted cases that you can find in the market.

Standard Inverted Case – These are typical inverted PC cases with inverse layout design, in which the motherboard and the components are mounted in an upside-down fashion only. In these cases, you cannot mount the motherboard in a regular or standard layout.

Modular Inverted Case – These are more expensive cases that offer multiple layout designs, which include standard or regular layout, inverse layout, and maybe a 90-degree rotation layout, depending on the case. These are highly modular cases that offer great flexibility and multiple layout options to choose from.  

Flipped Inverted Case – These are the cases that can be flipped upside down to have an inverted layout. These cases have a symmetrical design that allows them to be placed in either fashion i.e. regular or inverted layout, depending on your liking or requirement. These cases may not offer the same advantages of a proper inverse layout design, because the installation and positioning of the internal components remain the same. The only advantage you can get here is that you can place this case on either side i.e. left or right, and can view all the components through a transparent side window panel (if it has one) while working on your desktop.

Advantages of Inverted PC Case

Here are the most common advantages that an inverted computer case offers.

Better Airflow – Most inverted PC cases offer better airflow compared to cases with a standard layout. This is because the front fans in these cases are positioned in such a way that they blow cool air directly on the main components, which include your CPU Cooler, Graphics Card, and RAM. Also, most of these cases do not have hard drive cages & PSU in between the front fans and the motherboard, which results in direct airflow to the components without any obstruction, and thus better cooling performance. Another benefit of the inverted layout is that if you have a graphics card supporter then it will make contact only with the backside of the graphics card, which eliminates any potential interference with graphics card fans.

inverted-case-airflow

Left Side Setup – If you do not have space on the right side of the desk, and want to place your desktop on the left side with a clear view of the components through a transparent side panel, then an inverted case is the only solution because it has transparent window or panel on the right side, through which installation is done. This is because in a case with a standard layout, you can only view the internal components through the left side panel only, even if both the side panels of the case have a transparent window or tempered glass panel.   

Style Statement – A case with an inverted layout really stands out from the crowd, because most of the computer cases in the market have regular layouts only. You can also show off these cases to your friends and can amaze them with your fancy inverted PC case.  

Quieter – Some of the inverted PC cases are very quiet in operation than regular cases, because of the direct airflow and the aerodynamics involved with inverted design.

Related: Best Airflow PC Cases for Gaming & Overclocking

Best Inverted ATX Cases

Here are the best inverted ATX cases that can fit an ATX motherboard or higher. Most of these PC cases are in mid-tower and full-tower form factors.

be quiet! Dark Base PRO 900 rev.2

[Highly Modular, Feature Rich, Spacious, Silent]

be quiet! Dark Base PRO 900 rev.2 is a high-end Full tower case that you can get for building a powerful gaming PC or workstation. This is not only an Inverted ATX case, but also a silent case that comes with tons of features, and some of them are so unique that you would normally do not find them in other cases. This is a big case that can support up to XL-ATX motherboards, both in the inverted and standard layout. For cooling, the case comes with two 140mm Silent Wings 3 fans at the front and one at the rear. You can also optionally install additional fans at the front, top, and at bottom for increased airflow and cooling. For noise reduction, the case has got sound dampening mats on the front, side, and top panel. On the front panel, you will get two USB 3.0 ports, one USB 3.1 Type C port, audio ports, and one special USB Type-A Port that supports Quick charging for supported smartphones. On the top of the front panel, you get the wireless charger that can charge your Qi supported smartphone through wireless charging.

be-quiet-Dark-Base-PRO-900-rev.2

The case also has got a dual Rail PWM Fan controller hub (8 fans), and each one of them can be switched between silent or performance mode of operation. Inside the case, you also have the RGB LED Strip that supports six colors, which can be switched according to your liking. The side panel is made of tinted tempered glass that allows you to have a look at your internal components from the outside. The case has got modular HDD slots for greater flexibility, and you can install or remove them according to your requirements. It supports up to two 5.25” drives, up to five 3.5” drives, and up to ten 2.5” drives. The case has got a relocatable motherboard tray that can be decoupled and can be adjusted to different heights, or you can install it along with the left panel in an inverted layout for better airflow. Moreover, the motherboard tray can be removed for using the case as a test bench, which might come in handy, when you are just testing some hardware components. The case comes with a full-length PSU shroud, and it is located at the bottom location. The only complaint this case has is that the mounting of PSU is a little bit tricky and annoying, and takes some time and effort.

The case can support high-end graphics cards up to 325mm / 470mm (w/o HDD bracket) in length, a tall CPU cooler up to 185mm in height, and up to 420mm Radiators for custom water cooling or AIO coolers. The build quality of the case is top-notch and so is its performance. The case is a bit on the expensive side but its worth it because of its amazing features, quality, and performance. So, if you are looking for a feature-rich and spacious high-quality case for your high-end gaming PC or work PC with inverted layout support, then you won’t find anything better than this. This case is available in three color options: orange, black, and silver. Highly Recommended by me for Enthusiasts and Gamers.

Note: There is also an old model of this case without rev. 2 i.e. Dark Base PRO 900 only, that does not come with PSU shroud and misses out on features, such as quick charging USB port and USB Type C port on the front panel. Another excellent inverted computer case from be quiet! is be quiet! Silent Base 802.

be quiet! Dark Base PRO 900 rev.2 Specifications
Form Factor Full Tower
Motherboard E-ATX, XL-ATX, ATX, M-ATX, Mini-ITX
Drive Bays 5.25” x 2, 3.5” x 5, 2.5” x 10
Front Ports USB 3.0 x 2, USB 3.1 Type C Gen. 2 x 1, USB quick charging option, HD audio (microphone + headphones), RGB control switch, HDD status display
Expansion Slots 8
CPU Cooler Height 185mm
Graphics Card Length 325mm / 470mm (w/o HDD bracket)
Fans & Cooling Front: 120mm/140mm x 3

Top: 120mm x 4 / 140mm x 3

Rear: 140mm x 1

Bottom: 120mm/140mm x 2

Features Tempered Glass Side Panel, Integrated Wireless Charger for Qi-enabled Smartphones, Integrated LED Strips with six switchable colors, Modular Design, Modular HDD Slots, Sound insulation mats (Front/Top/Side), Dual Rail PWM Fan Controller (8 Fan support) with Silent/Performance mode, up to 420mm Radiator support, Front & Bottom Dust Filters, Cable Routing, Removable & Relocatable Motherboard tray

Buy be quiet! Dark Base PRO 900 rev.2

Lian Li O11 Dynamic EVO

[Dual Layout (Standard/ Inverted), Spacious, Feature Rich, Strong Build Quality, RGB Lighting]

To me, Lian Li O11 Dynamic EVO is probably the best inverted PC Case in the market right now. It is because of its versatility, features, build quality, space, cooing performance, looks, pricing, build quality, and color options. This PC Case has literally everything that you can wish for. The Case is very customizable and you can use this PC Case in either Standard or Inverted layout depending on your requirement or need. Even though it is a Mid-tower Case, it offers a huge amount of space for mounting multiple radiators, flagship graphics cards, and other high-end components. The Case can support up to E-ATX motherboard having a width under 280mm. For airflow, it can support up to ten fans and also offers an option to mount a 60mm fan on a hard drive cage for keeping your HDD and SSD cool. The I/O ports include two USB 3.0 ports, one USB 3.1 Type-C port, and an HD Audio port. The I/O ports are relocatable and you can move them to three different locations (front/left/right) depending on your preference. The front and side of the Case have full-sized tempered glass panels that allow you to view all of your internal components for showcasing.

Lian-Li-O11-Dynamic-EVO

Lian Li O11 Dynamic EVO can support full-sized graphics cards with lengths up to 426mm. It can support CPU Coolers up to 167mm in height and up to three 360mm Radiators and 220mm PSU. The PC Case also gives you the option to install a second PSU by removing the drive cage.  For storage, the Case supports up to 9 storage drives. Coming to aesthetics, it is a beautiful and clean-looking Case and also comes with a fancy ARGB LED Strip at the front. The RGB lighting of the LED strip can be controlled using the LED control button on the Case or by using the motherboard RGB software. The build quality of the PC Case is very good and it does feel solid at all places. The Case also allows you to mount the graphics card in a vertical orientation using the vertical GPU kit optional accessory. Also, the Dual Chamber design of the Case makes cable management very easy and tidy. Lian Li O11 Dynamic EVO is available in three colors which are black, white, and harbor grey. Highly Recommended!

Lian Li O11 Dynamic EVO Specifications
Form Factor Mid-tower
Motherboard E-ATX (width: under 280mm), ATX, M-ATX, ITX
Drive Bays Bottom: 2.5” SSD × 4 or 3.5” HDD × 2
Side: 2.5” SSD × 4 or 3.5” HDD × 2
Front Ports 2 × USB 3.0
1 × USB 3.1 TYPE-C,
1 × HD AUDIO/ MIC
LED Color and Mode button
Expansion Slots 8
CPU Cooler Height 167mm
Graphics Card Length 426mm
Fans & Cooling Top: 120mm × 3 or 140mm × 2
Side: 120mm × 3 or 140mm × 2
Bottom: 120mm × 3 or 140mm × 2
Rear: 120mm × 1
On Drive Cage: 60mm × 1
Features Bottom Dust Filter, Dual PSU Support, 220mm PSU support, Up to 3x 360mm Radiator Support, Tempered Glass Panel (Front & Side), Cable Management Bar, Dual modes: Normal Mode/ Reverse Mode, Multi-directional power button and movable IO module, Dual-chamber layout, Front panel ARGB LED strip, Five optional accessories: Vertical GPU Kit / Upright GPU Kit / Additional I/O kit / Front Mesh Kit / Top I/O Kit

Buy Lian Li O11 Dynamic EVO

Corsair Carbide 600C Inverse ATX Case

[Full Inverse Layout, Swing-able Side Panel]

Corsair Carbide 600C is a Full Tower Inverse ATX Case from Corsair. This case only supports a full inverse layout design with PSU mounted at the top of the case. This is a pretty spacious case and supports up to ATX-sized motherboards, and for cooling, it comes with three Corsair AF140L fans installed, two at the front and one at the rear, which is located at the bottom side of the rear panel because of inverse layout design. You may also install 120mm/140mm fans at the bottom too for increasing the airflow further. The case features a swingable transparent side panel that can be opened very easily by a single hand, just by releasing the latch. On the front top panel, you will get I/O ports that include two USB 3.0 ports, two USB 2.0 ports, Audio ports, and a three-speed fan controller for adjusting your fan speed depending on the temperature.

Corsair-Carbide-600C-Inverse-ATX-Case

The case can support a 370mm long high-end graphics card, up to 200mm tall CPU Cooler, and up to 360mm Radiator for water cooling or an AIO cooler. Because of the completely inverse layout design and no hard drive cages in between the front fans and the components (CPU Cooler, Graphics card, motherboard, RAM), the case has excellent direct airflow to the major components and is also pretty quiet in operation. It supports two 5.25” drives, two 3.5” drives, and three 2.5” drives. The 3.5-inch hard drives can be installed in the PSU shroud at the top and 2.5” drives at the back of the motherboard panel. The case has good build quality and has front and top steel panels. Other features of this case include Front & Bottom dust filters, PSU Shroud, cable routing, and a 5.25” bay cover. Overall, a very practical, roomy, and pretty quiet inverse ATX case that is on the affordable side too.

Corsair Carbide 600C Inverse ATX Case Specifications
Form Factor Full Tower
Motherboard Mini-ITX, Micro-ATX, ATX
Drive Bays 5.25” x 2, 3.5” x 2, 2.5” x 3
Front Ports USB 3.0 x 2, USB 2.0 x 2, Audio Ports, 3-Speed Fan Controller, Power/Reset
Expansion Slots 8
CPU Cooler Height 200mm
Graphics Card Length 370mm
Fans & Cooling Front: 120mm/140mm x 2

Rear: 120mm/140mm x 1

Bottom: 140mm x 2, 120mm x 3

Features Up to 360mm Radiator support, 210mm PSU support, Front & Bottom Fan Filters, Cable Routing, 5.25” Bay Cover, Steel Front & Top Panels, Hinged & Latched Full Side Panel Window with Panoramic View, Full-length PSU shroud, Tool-free drive installation

Buy Corsair Carbide 600C Inverse ATX Case

Cooler Master COSMOS C700P Full Tower Case

[Beautiful & Stylish, RGB, Modular, Water Cooling Ready]

Cooler Master COSMOS C700P is a beautiful Full Tower Case that comes with RGB Lighting and can fit up to E-ATX sized motherboard. This is a highly modular case and offers three layout options, which include regular layout, chimney layout, and inverted layout. This is a water-cooling-ready case and has tons of space to accommodate all of your high-end components. The case has good airflow and offers fan mounting points at the front, bottom, rear, and top. It comes pre-installed with two 140mm fans at the front and one at the rear. You can optionally install more fans for increasing airflow for better cooling. The case also features two sleek aluminum handles on the top for moving or carrying the case comfortably. The front I/O ports include four USB 3.0 ports, one USB 3.1 Gen 2 Type C port, audio ports, and RGB control buttons for changing RGB lighting and effects to your liking.

Cooler-Master-COSMOS-C700P

This case can fit graphics cards that are up to 490mm long, CPU Coolers that are up to 198mm tall, and up to 420mm Radiators for AIO cooler or custom water cooling. The case also comes with a panoramic tempered glass side panel that allows you to have a look at all of your internal components from the outside. It can accommodate up to eight 3.5”/2.5” drives, and two 2.5” drives and can fit two 5.25” ODD for your DVD or Blue-ray writer or drive. Some other features of this highly-modular case include removable dust filters, cable routing, and tool-free drive installation. The case has a pretty good build quality and is one of the best-looking cases around. This is the ultimate case for enthusiasts for building a high-end gaming PC or workstation.

Note: This case is also available with ARGB lighting, an adjustable GPU mounting seat for vertical placement of the graphics card, and an aluminum front panel. The model number for this case is C700M, and you can check out both these cases from the links given below. The main difference between the C700M and the C700P is the C700M has ARGB LED strips and an ARGB control panel, GPU mounting seat that can be adjusted, and the front panel is aluminum.

Read also: Best RGB PC Cases for Building a Fancy Gaming PC

Cooler Master COSMOS C700P Specifications
Form Factor Full Tower
Motherboard Mini-ITX, Micro-ATX, ATX, E-ATX (Support 12″ x 11″)
Drive Bays 5.25” x 2, 2.5″/3.5″ x 8 or 9 (with ODD bay removed), 2.5” x 2
Front Ports USB 3.1 Gen 2 Type C x 1, USB 3.0 x 4, Fan Speed & RGB control buttons, Audio ports
Expansion Slots 8
CPU Cooler Height 198mm
Graphics Card Length 320mm / 490mm (without 3.5″ HDD cage)
Fans & Cooling Front: 120mm/140mm x 3

Top: 120mm/140mm x 3

Rear: 120mm/140mm x 1

Bottom: 120mm/140mm x 2

Features Dual-curved Tempered Glass Side Panel, up to 420mm Radiator support, Sleek & Solid Aluminum Handles, Dust Filters (Front/Top/Bottom), Cable Routing & Management, Tool-Free Drive installation

Buy Cooler Master COSMOS C700P (RGB)

Buy Cooler Master COSMOS C700P (ARGB)

be quiet! Dark Base 700

[Quiet, Modular, RGB Lighting]

be quiet! Dark Base 700 is a silent mid-tower case that can support up to an E-ATX size motherboard. This case resembles much like its bigger brother, which is be quiet! Dark Base PRO 900 rev.2, and shares some of the features present in it. The case comes with a relocatable and removable motherboard tray that can be placed in both regular and inverse layout fashion. The detachable motherboard tray also serves as a test bench, when removed completely from the case. However, the position of the PSU remains at the bottom only, which is protected by a full-length shroud. The case comes with two Silent Wings 3 140mm PWM fans, one at the front, and one at the rear. You can optionally install more fans at the front and the bottom to further increase the airflow and cooling performance.

be-quiet-Dark-Base-700

As this is a silent case, it comes with sound dampening pads on the front, side, and top panel. It also comes with a dual-rail PWM fan controller that can be switched between silent and performance modes of operation using the physical switches present on it. The front panel also sports RGB LED strips on the sides that support six colors and looks super amazing. The RGB LEDs can be synchronized using the RGB controller or using the motherboard RGB header using its RGB software. The I/O ports on the front panel include two USB 3.0 ports, one USB 3.1 Gen 2 Type C port, audio ports, and a 4-Speed fan controller switch.

The case can support graphics cards up to 430mm in length, tall CPU coolers up to 180mm in height, and up to 360mm radiator for liquid cooling. The hard drive cages are modular that allow for much better flexibility and space-saving inside the case. The case offers plenty of space for your storage drives so that you don’t have to worry about your data storage needs. Other features include removable dust filters, tempered glass side panel, and cable routing. As always, a high-quality case from be quiet! that is quiet, looks great, offers great flexibility, and has very good cooling performance.

be quiet! Dark Base 700 Specifications
Form Factor Mid-Tower
Motherboard E-ATX (30.5 x 27.5cm), ATX, M-ATX, Mini-ITX
Drive Bays 3.5” x 3 (up to 7), 2.5” x 9 (up to 17)
Front Ports USB 3.0 x 2, USB 3.1 Gen 2 Type C x 1, HD

Audio (mic + headphone jacks), fan controller switch, RGB controller button

Expansion Slots 7+2
CPU Cooler Height 180mm
Graphics Card Length 286mm / 430mm (w/o HDD slots)
Fans & Cooling Front: 120mm/140mm x 3

Top: 120mm/140mm x 3

Rear: 120mm/140mm x 1

Bottom: 120mm/140mm x 1

Features Sound dampening mats (front, top, side), Anti-vibration decoupled HDD / PSU / MB-tray, Dual Rail PWM Fan Controller (6 Fan), RGB LED Strips on Front, up to 360mm Radiator support, dust Filters (Front/Bottom/Top), Tempered Glass Side Panel

Buy be quiet! Dark Base 700 Mid Tower Case

darkFlash V22 White Mid Tower ATX Case

[Stylish & Elegant, Vertical Layout, Good Airflow, Magnetic Flip Tempered Glass Side Panel]

darkFlash V22 is a very innovative case having a right-side opening window panel. The case does not have an inverted layout but rather a vertical layout with motherboard I/O ports facing upwards. This vertical layout design allows do offer more advantages over the standard and inverted layout design. It offers better airflow especially for the graphic card because the front intake fans blast air directly onto the graphics card shroud resulting in faster cooling. Moreover, the vertical installation can reduce the pressure on the motherboard and prevent deformation. darkFlash V22 is a mid-tower case and can support up to an ATX motherboard. It is a beautiful case with an elegant design with subtle stylish elements. For cooling, the case has mesh vents at the side of the front panel and supports three 120mm or two 140mm fans at the front and two 120mm fans at the rear. The front I/O ports include two USB 3.0 ports and HD Audio ports.

darkFlash-V22-White-Mid-Tower-ATX-CaseThe case can support up to 310mm long graphics card, up to 165mm tall CPU Cooler, and up to 240mm Radiator for AIO or Liquid Cooling unit. The case features a Magnetic Flip Tempered Glass Panel that opens like a door for easy access to your internal components. The front panel has removable dust filters and the cable management in the case is also very good. When it comes to storage then the case has one 3.5-inch drive bay and two 2.5-inch bays for SSDs. Overall, a good-looking case with great airflow and a unique vertical layout design. The case is available in two colors: white and mint green. High Recommended!

darkFlash V22 White Mid Tower ATX Case Specifications
Form Factor Mid-Tower
Motherboard Mini-ITX, Micro-ATX, ATX
Drive Bays 3.5” x 1, 2.5” x 2
Front Ports USB 3.0 x 2, HD Audio
Expansion Slots 7
CPU Cooler Height 165mm
Graphics Card Length 310mm
Fans & Cooling Front: 120mm x 3 / 140mm x 2

Rear: 120mm x 2

Features Magnetic Flip Tempered Glass Panel, Vertical GPU mount, up to 240mm Radiator support, Tool-free installation, Front Side Mesh Panel, Removable Dust Filter, Cable Management

Buy darkFlash V22 White Mid Tower ATX Case

RIOTORO CR1080 Mini-Tower Case

[Ultra Compact, ATX MB support]

A mini-tower case from RIOTORO that has an inverse layout design and can fit up to a full-size ATX motherboard. This small form factor case is only 14-inch tall and is divided

into two chambers: left and right. The left chamber accommodates the motherboard, CPU, and GPU and the right chamber fits PSU, HDD / SDD bays, and ODD bay (5.25”). The case comes with one blue LED 120mm fan at the front, but you can also install one more 120mm fan at the front and one 80mm at the rear for increased airflow and cooling. The front I/O ports include two USB 3.0 ports and audio ports.

RIOTORO-CR1080-Mini-Tower-Case

The case can fit 300mm long graphics cards, which is quite reasonable, but can only fit 120mm tall CPU coolers, which is a kind of challenge and it is better to use low profile CPU cooler for this case. The case also supports a 240mm radiator for AIO liquid cooling, but it is better to use a 120mm AIO cooler only in this case because of space constraints. The side panel of the case has a transparent window for having a look at your inside components. Other features include dust filters, cable routing, and tool-less drive installation. So, if you are looking for an ultra-compact inverse ATX case for building an SFF gaming PC then this is the case for you.

Note: An RGB model of this case is also available as RIOTORO CR1088, and you can check it out too from the links given below.

RIOTORO CR1080 Mini-Tower Case Specifications
Form Factor Mini-Tower
Motherboard Mini-ITX, Micro-ATX, ATX
Drive Bays 5.25” x 1, 3.5” x 1, 2.5” x 1, 3.5”/2.5” x 1 (convertible)
Front Ports USB 3.0 x 2, Audio
Expansion Slots 7
CPU Cooler Height 120mm
Graphics Card Length 300mm
Fans & Cooling Front: 120mm x 2

Rear: 80mm x 1

Features Up to 240mm Radiator support, Dust Filters (front/top/bottom), Cable routing, Dual chamber design, Tool-less drive installation, up to 220mm PSU support, Direct Airflow

Buy RIOTORO CR1080 Mini-Tower Case

Buy RIOTORO CR1088 Mini-Tower RGB Case

Thermaltake Core G3 Gaming Slim ATX Chassis

[Slim Design, Two Way Placement]

Thermaltake Core G3 is a slim small form factor ATX case with an inverse layout design. Even being a slim case, it can support ATX motherboards and other high-end components and is water-cooling ready (Thermaltake Tt LCS Certified). It has got a mesh front panel with two 120mm fans pre-installed at the front, and you optionally install a 120mm at the top too. At the top of the front panel, I/O ports are located that include two USB 3.0 ports, two USB 2.0 ports, and Audio ports.

Thermaltake-Core-G3-Gaming-Slim-ATX-Chassis

The case supports two expansion slots and can fit even a full-height dual-slot graphics card, having lengths up to 370mm. The graphics card has to be mounted in the vertical position only, using the PCIe Riser cable, that comes included with the case. However, the CPU cooler support is limited to a height of up to 110mm, and you have to use either a low-profile CPU air cooler, AIO cooler, or custom water block for it. Also, it does support SFX PSU only, because of its slimmer design, and the power supply is seated at the bottom position.

The case allows two-way placement, which means it can be placed horizontally and vertically. The side panel is transparent which allows a complete view of your internal components from the outside. You can install up to two 2.5” / 3.5” drive in the case. Other features include removable dust filters and tool-less drive installation. So, if you are looking for an SFF inverse layout case for your compact gaming or workstation build, then this is a great case to have.

Thermaltake Core G3 Gaming Slim ATX Case Specifications
Form Factor Slim ATX (Low Profile)
Motherboard Mini-ITX, Micro-ATX, ATX
Drive Bays 3.5” / 2.5” x 2
Front Ports USB 3.0 x 2, USB 2.0 x 2, Audio
Expansion Slots 2
CPU Cooler Height 110mm
Graphics Card Length 310mm (with front fan) [up to dual slot only]
Fans & Cooling Front: 120mm x 2

Top: 120mm x 1

Features SFX PSU support only, Two-way placement (horizontal/vertical), up to 240mm Radiator support, Removable dust filters, cable routing, Tool-free drive installation, Thermaltake Tt LCS Certified for liquid cooling, PCI-e riser cable included, Mesh Front Panel, Transparent Side Panel

Buy Thermaltake Core G3 Gaming Slim ATX Case

SilverStone RV04 Full Tower Case [SST-RV04B-W]

When it comes to PC cases, then Silverstone has every variety under its belt. Here we have SilverStone RV04, which is a full tower ATX case that can support up to SSI-EEB motherboards and offers lots of room for all your high-end components. The case has an inverted layout design that helps in achieving better cooling performance. It comes with two Air Penetrator AP181 180mm Fans at the front, and you can optionally install one 120mm fan at the top to increase airflow. The I/O ports on this case are located on the side, which includes two USB 3.0 ports and audio ports.

SilverStone-RV04-Full-Tower-Case

The case can fit high-end graphics cards up to 337mm long, 165mm tall CPU coolers, 180mm ATX PSU, and up to 360mm Radiator. The case has adjustable support for both CPU cooler and graphics card to prevent them from bending. It also has got lots of storage space for your drives as it can accommodate two 5.25” external drives and up to seven 3.5” drives, out of which two are hot-swappable and up to four 2.5” drives for your SSDs. Other features include easily accessible and removable dust filters, up to Kensington locks support, tool-less drive installation, a side panel with a transparent window, and cable management.  

Note: This case is also available with an aluminum front door and top panel, and with foam padded panels for noise absorption (for quieter operation), while other specifications remain almost the same. It has a model number SilverStone FT04B-W (Fortress series), and it does cost somewhat extra.   

SilverStone RV04 Full Tower Case Specifications
Form Factor Full Tower
Motherboard SSI-EEB*, SSI-CEB, Extended ATX, ATX, Micro-ATX
Drive Bays 5.25″ x 2, 3.5″ x 7 (2 hot-swap), 2.5″ x 4
Front Ports USB 3.0 x 2, Audio
Expansion Slots 8
CPU Cooler Height 165mm
Graphics Card Length 337mm long, 169mm width restriction
Fans & Cooling Front: 2 x Air Penetrator AP181 180mm intake fan 600/900/1200rpm, 18/25/34dBA

Rear: 120mm x 1 (optional)

Features Up to 360mm Radiator support, 180mm PSU support, Support two Kensington locks, Adjustable CPU cooler support, Removable motherboard tray, Removable Dust filters, Adjustable graphics card support, PSU shroud, Tool-less drive installation, Cable management

Buy SilverStone RV04 Full Tower Case

SilverStone Raven RV02 Case

[90-degree MB layout, High Airflow,  For Servers & Workstations]

SilverStone Raven RV02 is a very unique PC case as it does not come with a full inverse layout, but rather a 90-degree motherboard layout, in which the expansion slots and I/O ports come at the top of the case, rather than at the rear. The case comes with ample internal space and can fit an 11-inch wide ATX motherboard. It comes with three 180mm fans at the bottom that serve as intake fans, and one 120mm fan at the top that functions as an exhaust fan. Due to this 90-degree layout and design, it has great airflow and offers very good cooling performance. The front I/O ports include two USB 3.0 ports and audio ports.

SilverStone-Raven-RV02-Case

The case can support up to 305mm long graphics cards, and 169mm tall CPU coolers but does not include enough support for liquid cooling and radiators. For storage, it offers plenty of mounting points and can support up to five to eight 5.25” drives, up to three 3.5” drives, and one 2.56” drive. This is a great case for building a server or workstation, but may not be a good option for a gaming build. Other features include dust filters, cable management, transparent window side panel, and tool-less drive installation.

Read also: Best Super Tower Cases for Servers and Workstations

SilverStone Raven RV02 Case Specifications
Form Factor Full Tower
Motherboard SSI-CEB, ATX (maximum 12” x 11”), Micro-ATX
Drive Bays 5.25″ x 5 or 8 (without hard drive), 3.5″ x 3 (w/ suspension system), 2.5” x 1 for SSD
Front Ports USB 3.0 x 2, Audio
Expansion Slots 8
CPU Cooler Height 169mm
Graphics Card Length 305mm
Fans & Cooling Top: 120mm x 1 exhaust fan, 950rpm, 18dBA

Bottom: 180mm x 3 intake fan 700/1200rpm, 18/34dBA

Features 90-degree motherboard layout, Dust Filters, Cable management, Tool-less drive installation, transparent window side panel

Buy SilverStone Raven RV02 Case

Best Inverted Micro-ATX Cases

Here are the best inverted Micro-ATX cases that can fit a Micro-ATX or Mini-ITX motherboard.

SilverStone LD01 Lucid (SST-LD010)

[Clean Design, Good Airflow, Tempered Glass Panels]

SilverStone LD01 is undoubtedly one of the best inverted micro-ATX cases around. This is a clean-looking beautiful case that is practical, spacious yet compact, packs a lot of features, and delivers good cooling performance. For airflow, you can install two 120mm/140mm fans on the front, two on top, and one 120mm fan at the rear. It has got three tempered glass panels, one in front and two on the sides, and they give this case a very premium look. The I/O ports on the front of the top panel include two USB 3.0 ports, one USB 3.1 Gen1 Type-C port, and audio ports.

SilverStone-LD01-SST-LD010

The build quality of the case is good and it can support a 370mm long graphics card, 168mm tall CPU cooler, 220mm PSU, and up to 280mm Radiator for liquid cooling. or AIO. For storage, it supports up to three 3.5-inch hard drives and up to two 2.5-inch drives for SSD. Other salient features of this case include an adjustable graphics card holder (to prevent it from sagging), removable dust filters, cable management, PSU shroud, and tool-less drive installation. So, if you are looking for a micro-ATX inverted case with good airflow and great looks for your compact gaming build, then just go for it.

SilverStone LD01 PC Case Specifications
Form Factor Micro-ATX
Motherboard Micro-ATX, Mini-DTX, Mini-ITX
Drive Bays 3.5″ x 3 (compatible with 2.5″), 2.5″ x 2
Front Ports USB 3.0 Type-A x 2, USB 3.1 Gen1 Type-C x 1, Audio
Expansion Slots 5
CPU Cooler Height 168mm
Graphics Card Length 370mm
Fans & Cooling Front: 120mm / 140mm x 2

Rear: 120mm x 1

Top: 120mm / 140mm x 2

Features Up to 280mm Radiator Support, Tempered Glass Panels (Top, Left/Right Side), up to 220mm PSU support, Removable Dust Filters, Adjustable multi-position GPU holder, Tool-less drive installation, Cable management, PSU shroud

Buy SilverStone LD01 Lucid Case

BitFenix Phenom Micro-ATX Cube Case

BitFenix Phenom is a Micro-ATX Cube case for building small form factor computers. It has got an inverse layout design for the motherboard and has better airflow due to it. This may be a tiny case, but it packs a lot of room for its size and can fit most of your gaming components, including a high-end graphics card. It comes pre-installed with one 120mm fan at the bottom and one at the rear. Optionally, you can install a much bigger 200mm fan or 230mm fan at the bottom, and two 120mm fans on top for increasing the airflow and cooling performance. The I/O ports are located on the side that includes two USB 3.0 ports and HD audio ports. The case does not come with a transparent window on the side panel, which can be an area of concern for some users.

BitFenix-Phenom-Micro-ATX-Cube-Case

The case can easily fit a 320mm long graphics card, 160mm tall CPU cooler, and standard ATX PSU. It can also fit a slim 240mm Radiator at the top. The PSU is fitted at the bottom in an inverted (face down) position in this case. It offers ample space for your storage drive and can accommodate up to five 3.5” and 2.5” drives using the included adapter. Other features of this case include dust filters, cable management, and tool-less drive installation.

BitFenix Phenom Micro-ATX Cube Case Specifications
Form Factor Micro-ATX Cube
Motherboard Micro-ATX, Mini-ITX
Drive Bays 3.5” x 5, 2.5” x 5
Front Ports USB 3.0 x 2, HD Audio
Expansion Slots 5
CPU Cooler Height 160mm length (150mm width)
Graphics Card Length 320mm
Fans & Cooling Top: 120mm x 2

Bottom: 120mm x 2 or 200mm x 1 or 230mm x 1

Rear: 120mm / 140mm x 1

Features Up to 240mm Radiator (slim) support, standard PS2 ATX support, Dust filters, Cable management, tool-less drive installation

Buy BitFenix Phenom Micro-ATX Cube Case

Corsair Carbide Air 240 Micro-ATX Case

Here we have another Micro-ATX Cube case, which is Corsair Carbide Air 240. Technically, it is not an inverse layout case, but due to its symmetrical design and no built-in standing feet, the entire case can be flipped over to have an inverted and 90-degree layout. The case packs a decent amount of space for your components and is liquid cooling ready. For cooling, it comes with two 120mm fans at the front and one at the rear. You can optionally install more fans according to your liking and requirements for enhancing airflow. The I/O ports are located on the front which includes three USB 3.0 ports and audio ports. The side panel of the case features a large transparent window that allows you to look at internal components without opening them.

Corsair-Carbide-Air-240-Micro-ATX-Case

The case can fit graphics cards up to 240mm in length, and low-height CPU coolers up to 120mm tall only. However, it does support a full-length PSU and up to 240mm Radiator for AIO liquid cooling. The case has good build quality and its other features include cable routing, tool-less drive installation, and meshed front, top, and bottom panels. The case is compatible with H55, H60, H75, H80i, H100i, and H105 Corsair Liquid Coolers.

Corsair Carbide Air 240 Micro-ATX Case Specifications
Form Factor Micro-ATX Cube
Motherboard Mini-ITX, Micro-ATX
Drive Bays 3.5” x 3, 2.5” x 3
Front Ports USB 3.0 x 2, Audio
Expansion Slots 4
CPU Cooler Height 120mm
Graphics Card Length 240mm
Fans & Cooling Front: 120mm x 2

Top: 120mm x 2

Bottom: 120mm x 2

Rear: 80mm x 2

Side: 120mm x 2

Features Multi-layout orientation, up to 240mm Radiator, up to 240mm PSU support, Cable routing, Tool-free drive installation, Full side panel window, Direct Airflow path cooling

Buy Corsair Carbide Air 240 Micro-ATX Case

SilverStone RL08

[Feature Rich and Compact, High Airflow Design]

Quite possibly, the best compact Inverted PC Case you can get on the market right now. SilverStone RL08 is a micro-ATX case that is also geared towards high airflow. It comes with a full mesh front panel and a top mesh panel. The case comes with two 120mm RGB fans at the front, and you can also install additional fans; two 120/140mm fans at the top and one 120mm at the rear. As the case has an inverted motherboard layout, the graphics card fans are faced upwards and pull out fresh air from the top, which results in significantly better cooling performance. Also, with the positive pressure design of the case, heat will be exhausted through the vents (from front & top to rear) preventing dust accumulation over time. The front I/O ports consist of two USB 3.0 ports and audio ports.

SilverStone-RL08

The case can support graphics cards up to 345mm in length and CPU coolers up to 168mm tall. The case has an adjustable graphics card supporter that prevents the graphic card from sagging and prevents any accidental damage to the motherboard’s PCI-E x16 slot. When it comes to water cooling, then it can support up to 280mm radiators for AIO. For storage, the case supports one 5.25-inch drive, three 3.5-inch drives, and two 2.5-inch drives. The tempered glass panel on the right-side panel allows you to peek at the internal components. Other features include removable dust filters (front/top/bottom) and cable management. The case is available in two color schemes: red and white. Overall, a modern yet classy-looking inverted PC case that is compact, has good airflow and has enough space for all your high-end components to build a powerful gaming PC.

SilverStone RL08 Specifications
Form Factor Micro-ATX
Motherboard Micro-ATX, Mini-DTX, Mini-ITX
Drive Bays 5.25” x 1, 3.5” x 3, 2.5” x 2
Front Ports USB 3.0 Type-A x 2, Audio Ports
Expansion Slots 5
CPU Cooler Height 168mm
Graphics Card Length 345mm
Fans & Cooling Front: 140/120mm x 2 (2 x 120mm RGB fan included)

Top: 140/120mm x 2

Rear: 120mm x 1

Features Up to 280mm Radiator Support, up to 220m PSU support Front Full Mesh Panel, Removable Dust Filters (Front/Top/Bottom), Tempered Glass Side Panel, Adjustable Graphics Card Supporter, Cable Management, PSU Shroud, Available in Red and White color scheme

Buy SilverStone RL08 mATX Case

Some other options

Here are some other inverted ATX cases that might interest you:

See also:

Final Words

Inverted cases may not be the current norm, but they do have some great benefits and looks pretty cool. These cases can offer better airflow and you can also access the internal components quite easily too, because of the inverted layout. Above, I have listed all the best inverted ATX and Micro-ATX cases available in the market right now, and if you have kind of questions regarding them, then please ask your queries in the comment section below.

(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)

22 Comments

  1. matt September 20, 2019
  2. Asheen October 28, 2019
    • Akshat Verma October 29, 2019
      • Asheen October 29, 2019
  3. D.L. ten Bosch March 8, 2020
    • Akshat Verma March 8, 2020
  4. Debyn Crupper July 2, 2020
    • Akshat Verma July 2, 2020
  5. Christoph September 3, 2020
  6. Martin September 8, 2020
    • hud December 7, 2020
      • Akshat Verma December 7, 2020
  7. hud December 7, 2020
  8. Vin Flo December 25, 2020
    • Akshat Verma December 26, 2020
  9. Slimer April 7, 2021
    • Akshat Verma April 8, 2021
      • Slimer April 8, 2021
  10. Chris June 22, 2021
    • Akshat Verma June 23, 2021
  11. GT V April 1, 2023
    • Akshat Verma April 1, 2023

Reply Cancel Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.