Best 60mm & 40mm Fan for PC Case, Heatsink, 3D Printer [2024 List]

If you are looking for good 60mm and 40mm computer fans for PC cooling, DIY cooling, 3D Printers, and cooling other electronic devices then you are at the right place. Smaller 40mm and 60mm fans can have a wide range of applications just besides PC cooling. These smaller fans are rarely used for case cooling nowadays because all the computer cases use bigger case fans which are 120mm and 140mm fans. However, they can be used in a PC case for focused cooling or for cooling other components inside it. These fans can be used to cool down the Northbridge or motherboard chipset, NVMe or SATA / M.2 SSDs, VRMs, or maybe even RAM. You can also use these fans on your passively cooled graphics card or regular graphics card if it has been heating a lot and the factory-fitted fan is not performing well.

60mm and 40mm fans are also used for cooling down Server chassis (1U/2U), SFF or Mini-ITX PC, HTPC, Thunderbolt enclosure, eGPU box, Routers, Switches, Smaller CPU heatsinks, FLEX ATX Power Supply, Consoles (PS4 / Xbox, etc.), Inverters, Switches, 3D Printers, NAS server / RAID enclosure, DIY Projects, DVR / NVR systems, Raspberry Pi 3, Battery charger and other electronic devices.  So, here I am going to list down the best 60mm and 40mm fans for use in various devices for providing excellent cooling performance. Moreover, these fans also serve as better replacement fans in devices and appliances that use 40mm / 60mm fans for cooling.

Read also:

Best 40mm Fans

Below you can find the best 40mm fans for computer cooling and for cooling other devices. These 40mm fans can also be used as replacement fans for various devices and components including Flex ATX PSU.

40mm Fans 12V

Noctua NF-A4x10 FLX Fan

Noctua makes one of the best computer fans in the world and here we have Noctua NF-A4x10 FLX, which is a premium 40mm fan. I think this is the best 40mm fan that you can buy for a PC or cooling other components or devices. It shares the same premium features that you can find in the bigger fans from Noctua (80mm, 120mm, 140mm, etc.). The fan comes with Noctua proprietary SSO2 bearing that is known for a longer lifespan, higher performance, and silent operation. The fan speed is 4500 RPM and it uses a 3-pin connector. The fan is on the slimmer side and is only 10mm in thickness. This allows it to be compatible with most of the components and can be used for a variety of purposes.

Noctua-NF-A4x10-FLX-Fan

This fan generates airflow of 4.82 CFM and a good amount of static pressure at 1.78 mm H2O. It is also a very quiet fan and has a maximum noise rating of 17.9 dBA. It does have anti-vibration pads on the corners to minimize noise and vibrations. Other features include Flow Acceleration Channels, AAO frame, Stepped Inlet Design, Inner Surface Microstructures, Smooth Commutation Drive 2, Low-Noise Adaptor (L.N.A.), 3 to 2-pin Adaptor and Polarity Protection, OmniJoin Adaptor Set.

This high-quality 40mm fan can be used in computers or for cooing down components, northbridge, graphics cards, or as a replacement fan for 3D Printers, NVR, DVR, NAS, or other devices where a 40mm fan is used. There is also a PWM variant (4-Pin) of this fan that spins at speed in the range of 1000 to 5000 RPM and offers a bit more airflow and static pressure, but with a slightly higher noise level. Both these 40mm fans come with all the required connectors, cables, and adapters so that they can be connected to any device or fan header without any issue. The price of both these fans is almost equal and you can check out both of these models from the links given below. Highly Recommended by me.  

Noctua NF-A4x10 FLX Specifications
Fan Size 40x40x10mm
Bearing Type SSO2
Fan Speed 4500 RPM
Airflow 4.82 CFM
Static Pressure 1.78 mm H2O
Connector Type 3-pin
Noise Level 17.9 dBA

Buy Noctua NF-A4x10 FLX Fan [3-pin]

Buy Noctua NF-A4x10 PWM Fan [4-pin]

Noctua NF-A4x20 FLX Fan

Noctua NF-A4x20 FLX is another high-quality Noctua 40mm fan but this one is 20mm thick which is double the above-mentioned Noctua NF-A4x10 FLX Fan. Also, it delivers a bit better performance and stability because of its wider fan blades and frame. This fan has got all the premium features that include SSO2 bearing, Flow Acceleration Channels, AAO frame, Stepped Inlet Design, Inner Surface Microstructures, Smooth Commutation Drive 2, Low-Noise Adaptor (L.N.A.), 3 to 2-pin Adaptor, and Polarity Protection, OmniJoin Adaptor Set and Anti-Vibration Pads on the Corners for silent operation.

Noctua-NF-A4x20-FLX-Fan

This is a 3-pin fan and rotates at a constant speed of 5000 RPM. It generates Airflow of 5.53 CFM and Static Pressure of 2.26 mm H2O which are very good figures for such a smaller fan. The fan is super silent in operation and has a noise rating of 14.9 dBA only. You can use this as a replacement fan in routers, switches, NAS, DVR, NVR, 1U servers, and other devices, and it will provide you with much better performance than the original fan that comes along with them.

There is also a PWM 4-pin variant of this fan available whose speed can be controlled automatically through the PWM signal. The fan spins at a speed in the range of 1200 to 5000 RPM and has got the same airflow and static pressure figures. Also, both these fans come with required connectors, cables, and adapters to fit in any device having different fan headers. You can check out both these models from the links given below.

Noctua NF-A4x20 FLX Fan Specifications
Fan Size 40x40x20mm
Bearing Type SSO2
Fan Speed 5000 RPM
Airflow 5.53 CFM
Static Pressure 2.26 mm H2O
Connector Type 3-pin
Noise Level 14.9 dBA

Buy Noctua NF-A4x20 FLX Fan [3-pin]

Buy Noctua NF-A4x20 PWM Fan [4-pin]

Fractal Design Silent Series R2 40mm Fan

A very good 40mm fan from Fractal Design new Silent Series R2 fans. The fan has got a black frame with white fan blades and comes with hydraulic bearing. It comes with a 3-pin connector and has got a constant speed of 4000 RPM. The performance of this fan is quite good and it generates an airflow of 4.53 CFM and 1.95 mmH2O static pressure. It is a silent 40mm fan with a noise rating of 18 dBA. It does lack features such as anti-vibration pads on corners but comes with a sleeved cable. Overall, a decent fan for cooling down your computer components and can be used on other devices too.

Fractal-Design-Silent-Series-R2-40mm-Fan

Fractal Design Silent Series R2 40mm Fan Specifications
Fan Size 40x40x10mm
Bearing Type Hydraulic bearing
Fan Speed 4000 RPM
Airflow 4.53 CFM
Static Pressure 1.95 mmH2O
Connector Type 3-pin
Noise Level 18 dBA

Buy Fractal Design Silent Series R2 40mm Fan

Scythe Mini Kaze 40mm Fan

A silent 40mm fan from Scythe, which is a Japanese manufacturer of computer fans, and CPU coolers, and generally their products are of good quality. Here we have Scythe Mini Kaze 40mm Fan, which is a 10mm thick fan with sleeve bearing and comes with a 2-pin connector. The fan rotates at a constant speed of 3500 RPM and generates airflow of 4.11 CFM and air pressure of 2.13 mm H2O.

Scythe-Mini-Kaze-40mm-Fan

It is a very quiet 40mm fan having a maximum noise rating of 14 dBA. Due to its lower RPM, it does lack a bit in the airflow department but it is very useful for average jobs that include cooling down motherboard chipset or as a replacement fan for external HDD case fan, removable cases, or other devices. A 2-pin to 3-pin adapter comes bundled with this fan for use in computer cases or with 3-pin headers. The model number of this fan is SY124010L.

Scythe Mini Kaze 40mm Fan Specifications
Fan Size 40x40x10mm
Bearing Type Sleeve bearing
Fan Speed 3500 RPM
Airflow 4.11 CFM
Static Pressure 2.13 mm H2O
Connector Type 2-pin
Noise Level 14 dBA

Buy Scythe Mini Kaze 40mm Fan

Other Recommendations (Cheaper 40mm Fans)

40mm Fans 5V

Noctua NF-A4X10-FLX 5V Fan

This is a 5V variant of the above-mentioned Noctua NF-A4X10-FLX fan that works on 12V. It has the same specifications, features, and design but works on 5V. The fan uses a 3-pin connector and comes with SSO2 bearing. You can check the specifications of this high-quality premium 5V Noctua fan below.

Noctua-NF-A4x10-FLX-5V-Fan

Noctua NF-A4x10 FLX 5V Fan Specifications
Fan Size 40x40x10mm
Bearing Type SSO2
Fan Speed 4500 RPM
Airflow 4.82 CFM
Static Pressure 1.78 mm H2O
Connector Type 3-pin
Noise Level 17.9 dBA

Buy Noctua NF-A4X10-FLX 5V Fan

Noctua NF-A4x20 5V Fan

This is the 5V variant of the Noctua NF-A4x20 fan and it comes with the same features and specifications. The only different thing is that this one operates on 5V instead of 12V. It comes with SSO2 bearing and offers the same airflow, static pressure, rotational speed, and noise level. The fan uses a 3-pin connector but a 4-pin PWM variant is also available, and you can check both these variants from the links given below.

Noctua-NF-A4x20-5V-Fan

Noctua NF-A4x20 5V Fan Specifications
Fan Size 40x40x20mm
Bearing Type SSO2
Fan Speed 5000 RPM
Airflow 5.53 CFM
Static Pressure 2.26 mm H2O
Connector Type 3-pin
Noise Level 14.9 dBA

Buy Noctua NF-A4x20 5V Fan [3-pin]

Buy Noctua NF-A4x20 5V PWM Fan [4-pin]

GDSTIME 40x10mm 5V Brushless DC Fan

A decent 40mm fan having a thickness of 10mm. The fan comes with sleeve bearing, a 2-pin connector and has a speed of 5500 RPM. It generates a good amount of airflow at 6.4 CFM but is rather noisy in operation at 26 dBA. The fan works on 5 Volt DC. Overall, a standard 40mm fan with nothing special but works well and does the job.

GDSTIME-40x10mm-5V-Brushless-DC-Fan

GDSTIME 40x10mm 5V Brushless DC Fan Specifications
Fan Size 40x40x10mm
Bearing Type Sleeve bearing
Fan Speed 5500 RPM
Airflow 6.4 CFM
Static Pressure NA
Connector Type 2-pin
Noise Level 26 dBA

Buy GDSTIME 40x10mm 5V Brushless DC Fan

USB 40mm Fans 5V

AC Infinity MULTIFAN Mini 40mm Quiet USB Cooling Fan

This is a high-performance 40mm USB fan that has a wide range of applications. It can be mounted on routers, modems, DVD / Blu-ray players, DAC/amplifier, Xbox, PlayStation, other consoles, DVR, NVR, audio/video electronics, computers, and other DIY projects to cool them down effectively. The fan comes with Dual ball bearings and has a maximum speed of 6000 RPM. It generates a high airflow of 12 CFM and high static pressure of 4.2 mm-H2O. It has got silicon anti-vibration feet that absorb noise and fan vibrations for keeping it stable and quiet.

AC-Infinity-MULTIFAN-Mini-40mm-Quiet-USB-Cooling-Fan

The fan comes with a multi-speed controller attached to it for changing fan speed to low, medium, and high. You can also use it to turn the fan completely off when required. The fan blades are protected by the metal grill on both sides. Even being such a high-performance and high RPM fan, the fan is very silent and has a maximum noise rating of 18 dBA only. So, if you are looking for a multi-purpose 40mm fan with high performance and manual speed control, then look no further and get this one today.

AC Infinity MULTIFAN Mini 40mm USB Cooling Fan Specs
Fan Size 40x40x20mm
Bearing Type Dual Ball bearings
Fan Speed 6000 RPM
Airflow 12 CFM
Static Pressure 4.2 mm-H2O
Connector Type USB
Noise Level 18 dBA

Buy AC Infinity MULTIFAN Mini 40mm Quiet USB Cooling Fan

ELUTENG 40mm USB Fan

Another 5V 40mm USB fan but this one is cheaper and comes with almost the same features as found in AC Infinity MULTIFAN Mini 40mm Quiet USB Cooling Fan. The fan comes with ball bearing, a metal grill for protection, and a 3 Speed fan controller. The fan has a maximum speed of 5300 RPM but airflow is a bit lower at 4.4 CFM, considering the fan speed. However, it is still adequate and can be used for ventilation of VR glasses, TV boxes, Raspberry Pie, Router, Small PC Case, PlayStation, Xbox, DVR / NVR, DIY Projects, and other small electronic equipment ventilation. The fan is on the noisier side and has a maximum noise rating of 27 dBA. The USB cable is 3.3 feet long which I think is pretty decent for normal use. So, if you want a cheaper alternative then you may go for this one.

ELUTENG-40mm-USB-Fan

ELUTENG 40mm USB Fan Specifications
Fan Size 40x40x20mm
Bearing Type Dual ball bearing
Fan Speed 5300 RPM
Airflow 4.4 CFM
Static Pressure NA
Connector Type USB
Noise Level 27 dBA

Buy ELUTENG 40mm USB Fan

40mm Fan 24V

Adda AD0424HB-G73 24V DC Fan

If you are looking for a 24V fan then Adda AD0424HB-G73 will serve your purpose very well. This is a 10mm thick 40mm fan that comes with a ball bearing and 3-pin connector. The fan rotates at speed of 6000 RPM and generates a high airflow of 6.7 CFM and static pressure of 2.5 mm H2O. However, the fan is a bit on the louder side and has a maximum noise level rating of 25 dBA.

Adda-AD0424HB-G73-24V-DC-Fan

Adda AD0424HB-G73 24V DC Fan Specifications
Fan Size 40x40x10mm
Bearing Type Ball bearing
Fan Speed 6000 RPM
Airflow 6.7 CFM
Static Pressure 2.5 mm H2O
Connector Type 3-pin
Noise Level 25 dBA

Buy Adda AD0424HB-G73 24V DC Fan

Best 60mm Fans 12V

Below you can find the best 60mm fans for computer cooling and for cooling down other devices. These 60mm fans can also be used as replacement fans for various devices. All the below-mentioned 60mm fans work on 12V only.

Noctua NF-A6x25 FLX Fan

This is unarguably the best 60mm computer fan you can ever find in the market. Noctua NF-A6x25 FLX is a premium quality 60mm fan that comes with SSO2 bearing and a 3-pin connector. Due to its reduced motor hub size, the blades of this fan are longer and wider, resulting in higher airflow and air pressure. The fan rotates at a maximum speed of 3000 RPM and generates a high airflow of 17.18 CFM and static pressure at 2.18 mm H2O. The fan is very silent with a maximum noise rating of 19.3 dBA, and it also includes anti-vibration rubber pads on the corners that further minimize the noise and vibrations. It comes with Low Noise Adapters (L.N.A.) / Ultra Low Noise Adapters (U.L.N.A.) if you want to run it at lower speeds for quieter operation. You can use this fan for PC case cooling, computer components cooling, graphics card cooling, or cooling other electronic devices.

Noctua-NF-A6x25-FLX-Fan

Other major features of this 60mm fan include Flow Acceleration Channels, AAO (Advanced Acoustic Optimisation) frame, Stepped Inlet Design, Inner Surface Microstructures, and Smooth Commutation Drive 2. This is a 25mm thick fan which is the standard thickness of a computer fan. There is also a PWM 4-pin variant of this fan available that comes with the same features and specifications except for the fact that it can change its speed automatically from 550 RPM to 3000 RPM through a PWM signal. You can check both these models by going through the links given below.

Noctua NF-A6x25 FLX Fan Specifications
Fan Size 60x60x25mm
Bearing Type SSO2
Fan Speed 3000 RPM
Airflow 17.18 CFM
Static Pressure 2.18 mm H2O
Connector Type 3-pin
Noise Level 19.3 dBA

Buy Noctua NF-A6x25 FLX Fan [3-pin]

Buy Noctua NF-A6x25 PWM Fan [4-pin]

Noiseblocker NB-BlackSilentFan XR-2 60mm

Here we have a very good 60mm fan but this is from Blacknoise, a German company that makes high-quality and high-performance computer and industrial fans. This is an ultra-quiet 60mm fan that comes with NB-NanoSLI Lager bearing and spins at speed of 2200 RPM. The fan generates airflow of 14.13 CFM, static pressure of 1.19 mm H2O, and is super silent with a noise rating of 14.7 dBA only.

Noiseblocker-NB-BlackSilentFan-XR-2-60mm

The fan uses a 3-pin connector and has got very good build quality. The fan also looks great with blue-colored fan blades and a strong black fan frame. This fan is also 25mm thick and comes with four NB-slices for vibration-free assembly. So, if you are looking for a high-quality super silent 60mm then this should be on your list.

Noiseblocker NB-BlackSilentFan XR-2 60mm Specifications
Fan Size 60x60x25mm
Bearing Type NB-NanoSLI Lager bearing
Fan Speed 2200 RPM
Airflow 14.13 CFM
Static Pressure 1.19 mm H2O
Connector Type 3-pin
Noise Level 14.7 dBA

Buy Noiseblocker NB-BlackSilentFan XR-2 60mm

Noiseblocker NB-BlackSilent Pro PR-2 60mm Fan

Here we have another Noiseblocker fan from Blacknoise but this one offers a bit more performance, and features and lies in the premium class category. This fan is 25mm thick and comes with NB-NanoSLI Lager bearing and a 3-pin connector. This one has a higher speed of 2500 RPM and generates a higher airflow of 17.1 CFM and static pressure of 1.72 mm H2O. It is a silent performer with a maximum noise rating of 16.8 dBA. The fan comes in black color with black fan blades and frame structure.

Noiseblocker-NB-BlackSilent-Pro-PR-2-60mm-Fan

Salient features include the Bayer Makrolon rotor with anti-dust technology, weighted reinforced fiberglass PBT frame, and NB cable management. The fan comes bundled with 4 fine thread screws and knurled nuts, a silicone screw, a silicone frame for minimum vibration, and a sleeved 20mm and 50mm cable extension. This Noiseblocker NB-BlackSilent Pro PR-2 60mm Fan is a bit on the expensive side but it is totally worth the extra price that you pay.

Noiseblocker NB-BlackSilent Pro PR-2 60mm Fan
Fan Size 60x60x25mm
Bearing Type NB-NanoSLI Lager bearing
Fan Speed 2500 RPM
Airflow 17.1 CFM
Static Pressure 1.72 mm-H2O
Connector Type 3-pin
Noise Level 16.8 dBA

Buy Noiseblocker NB-BlackSilent Pro PR-2 60mm Fan

GELID Solutions SILENT 6 Fan

A decent 60mm fan from GELID Solutions. This fan advertises itself as silent but it is not as silent as the Noctua and Noiseblocker fans listed above and has a noise level rating of 24 dBA. The fan uses Hydro Dynamic bearing, Precisely balanced fan blades, and a 3-pin connector and spins at a constant speed of 3200 RPM. It generates a good airflow and static pressure at 16 CFM and 2.6 mm H2O respectively. It is on the slimmer side and has a thickness of 15.5mm only. The fan is well made and is also quite affordable. You can use this fan in a computer case or for cooling electronic equipment.

GELID-Solutions-SILENT-6-Fan

GELID Solutions SILENT 6 Fan Specifications
Fan Size 60x60xx15.5mm
Bearing Type Hydro Dynamic bearing
Fan Speed 3200 RM
Airflow 16 CFM
Static Pressure 2.6 mm H2O
Connector Type 3-Pin
Noise Level 24 dBA

Buy GELID Solutions SILENT 6 Fan

StarTech.com 60x10mm Ball Bearing Fan

A budget slim 60mm fan from StarTech.com. The fan is only 10mm in thickness or depth and comes with ball bearing and has a maximum speed of 4000 RPM. The fan generates airflow of 15.49 CFM but it is a bit on the louder side with a noise rating of 28 dBA. The fan uses a 3-pin connector, but a 3-pin to Molex adapter cable comes bundled with it for use with a 4-pin Molex connector.

StarTech.com-60x10mm-Ball-Bearing-Fan

This low-profile 60mm fan is an ideal replacement fan for various audio/video equipment, hard drive cages, power supply, HTPC, computer cases, or other electronic devices. It is a budget 60mm fan that works as expected and performs well. There are also 20mm and 25mm models of this fan available too, and you can check all of them by going to the link given below.

StarTech.com 60x10mm Fan Specifications
Fan Size 60x60x10mm
Bearing Type Ball Bearing
Fan Speed 4000 RPM
Airflow 15.49 CFM
Static Pressure NA
Connector Type 3-pin
Noise Level 28 dBA

Buy StarTech.com 60x10mm Ball Bearing Fan

Enokay 60x10mm Brushless DC Cooling Fan

A slim 60mm fan that comes with a fan grill for protecting fan blades. This is a budget 60mm fan that comes with a 2-pin connector and sleeve bearing. The fan spins at 3200 RPM and generates airflow of 13.8 dBA which is a bit on the lower side but enough for general applications. Also, the fan is a bit on the louder side at 26 dBA but it is acceptable for the price you pay for. So, if you are looking for a cheap 60mm fan then you can go for it.

Enokay-60x10mm-Brushless-DC-Cooling-Fan

Enokay 60x10mm Brushless DC Cooling Fan Specifications
Fan Size 60x60x10mm
Bearing Type Sleeve bearing
Fan Speed 3200 RPM
Airflow 13.8 CFM
Static Pressure NA
Connector Type 2-pin
Noise Level 26 dBA

Buy Enokay 60x10mm Brushless DC Cooling Fan

uxcell 60x15mm 12V DC Cooling Fan

A slim and cheap 60mm replacement fan that comes with sleeve bearing and 2-pin connector. The fan spins at speed of 3200 RPM and generates 11.5 CFM airflow which is decent enough for most users. This is one of the loudest fans on this list with a noise level of 28 dBA. There is also a 25mm thickness model available and you can check it out from the link given below.

uxcell-60x15mm-12V-DC-Cooling-Fan

uxcell 60x15mm 12V DC Cooling Fan Specifications
Fan Size 60x60x15
Bearing Type Sleeve bearing
Fan Speed 3200 RPM
Airflow 11.5 CFM
Static Pressure NA
Connector Type 2-pin
Noise Level 28 dBA

Buy uxcell 60x15mm 12V DC Cooling Fan

Buy uxcell 60x25mm 12V DC Cooling Fan

Some other options [60mm Fans]

See also:

Final Words

So, if you are looking for good quality 40mm and 60mm replacement fans or for computer/components cooling then I have listed the best ones out there. Some of them of premium fans that are super quiet and deliver great performance and some are cheaper ones that also do the job well especially as a replacement fan. If you have got any doubts or questions regarding them then please ask your queries by leaving a comment below.

(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)

Leave a Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.