GeForce RTX 3050 6GB is the most powerful low-power graphics card that does not require 6-pin/8-pin PCIe power connectors and draws all the required power from the PCI-E x16 slot only. The maximum power consumption of the card is only 70W. RTX 3050 6GB is around 30% faster than the RX 6500 XT and way more powerful than the GTX 1650 (more than 50% faster). Compared to its 8GB model i.e. RTX 3050 8GB that requires an 8-pin PCIe power connector, RTX 3050 6GB is around 25% slower than RTX 3050 8GB on average. RTX 3050 6GB is well suited for older OEM systems or builds that have a low-wattage PSU and it is not possible to upgrade the PSU because of limited options, proprietary connectors, or non-standard PSU size. RTX 3050 6GB is a decent card for eSports and 1080p gaming and can run most AAA games at medium-high settings with respectable FPS.
RTX 3050 6GB is based on the Ampere GPU architecture and is built on the 8nm manufacturing process from Samsung. The card uses the GA107 chip and comes with 2304 CUDA Cores, 18 RT Cores, and 72 Tensor Cores. The card comes with 6GB GDDR6 memory that has a 96-bit interface and runs at a speed of 14Gbps. The card supports DirectX 12 Ultimate, OpenGL 4.6, Vulkan, Real-Time Ray Tracing, Deep Learning Super Sampling (DLSS 3.0), HDMI 2.1, AV1 decode, G-Sync/FreeSync, PCI-E 4.0 (x8 lanes only), Nvidia Encoder (NVENC) 7th Generation, Nvidia Decoder (NVDEC) 5th Generation and Resizable BAR. There are various RTX 3050 6GB custom models available from different AIBs and to help you get the best RTX 3050 6GB model based on your specific requirements or needs, I am listing down some of the best ones available in the market.
Best Dual Fan RTX 3050 6GB
GIGABYTE GeForce RTX 3050 EAGLE OC 6G
[Compact, Semi-passive Cooling, Factory Overclocked, 4 Display output, Dual HDMI 2.1 ports]
GIGABYTE GeForce RTX 3050 EAGLE OC 6G is probably the best dual fan RTX 3050 6GB mode that you can get for your low-power system or small form factor build. This OC edition card comes slightly overclocked and has got GPU Boost Clock of 1500 MHz, 30 MHz more than the reference clock. The WINDFORCE cooling system employs an aluminum heatsink and two fans that have a unique blade design featuring a triangular fan edge and a 3D stripe curve for focused airflow and air pressure. These are alternate spinning fans that spin in opposite directions to reduce turbulence and enhance the airflow pressure. The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU temperature is on the lower side and fans start spinning automatically when GPU temperature increases with load during gaming or running GPU intensive application or software.
The card is pretty compact and fits in most mini-ITX and SFF builds or systems. It is 192mm in length and has a dual-slot design. The PSU recommendation for the card is 300W. Display connectivity options are plenty on this card as it offers two HDMI 2.1 ports and two DisplayPort 1.4a ports.
| GIGABYTE GeForce RTX 3050 EAGLE OC 6G Specifications | |
| CUDA Cores | 2304 |
| GPU Clock | 1500 MHz Boost |
| Memory Clock | 14 Gbps |
| Memory Size | 6GB GDDR6 |
| Memory Interface | 96-bit |
| Bus Interface | PCI Express 4.0 (x8) |
| DirectX | 12 |
| OpenGL | 4.6 |
| PCI-E Power Connector | None |
| Output Ports | HDMI 2.1 x 2, DisplayPort 1.4a x 2 |
Buy GIGABYTE GeForce RTX 3050 EAGLE OC 6G
RTX 3050 6GB with DVI Port
ASUS Dual GeForce RTX 3050 OC Edition 6GB
[Has DVI-D Port for older Monitors, Factory Overclocked, Great Value]
If you have an older system with an older monitor that does not have HDMI or DisplayPort but has a DVI port then you should get ASUS Dual GeForce RTX 3050 OC Edition 6GB. This RTX 3050 6GB model from Asus comes with a DVI-D port in addition to HDMI 2.1 and DisplayPort 1.4a ports. It is an overclocked model and has got GPU Boost Clock of 1507 MHz, 37 MHz more than the reference model. In OC mode using Asus GPU Tweak III software, you can set the GPU Boost Clock to up to 1537 MHz which is a significant increase over the reference GPU Boost Clock.
For cooling, the card uses a simple aluminum heatsink with two fans that are IP5X dust-resistant. The card is 201mm in length and has a dual-slot design. The card has got 304 Stainless Steel mounting bracket that is harder and more resistant to corrosion. Overall, a very good dual-fan RTX 3050 6GB model and is also priced at the base MSRP.
| ASUS Dual GeForce RTX 3050 OC Edition 6GB Specifications | |
| CUDA Cores | 2304 |
| GPU Clock | 1507 MHz Boost |
| Memory Clock | 14 Gbps |
| Memory Size | 6GB GDDR6 |
| Memory Interface | 96-bit |
| Bus Interface | PCI Express 4.0 (x8) |
| DirectX | 12 |
| OpenGL | 4.6 |
| PCI-E Power Connector | None |
| Output Ports | HDMI 2.1 x 1, DisplayPort 1.4a x 1, DVI-D x 1 |
Buy ASUS Dual GeForce RTX 3050 OC 6GB
Best Low Profile RTX 3050 6GB
MSI GeForce RTX 3050 LP 6G OC
[Factory Overclocked, Very Compact, Dual Fan Cooling]
MSI GeForce RTX 3050 LP 6G OC is a low-profile RTX 3050 6GB card for use in slim PC Cases or systems and small form factor PC builds. The card is super compact having a length of 174mm and has a dual-slot design. It is an overclocked card with a GPU Boost Clock of 1492 MHz, 22 MHz more than the reference. The card is cooled by an aluminum heatsink and dual fans over it. Display connectivity options include two HDMI 2.1 ports and one DisplayPort 1.4a port.
| MSI GeForce RTX 3050 LP 6G OC Specifications | |
| CUDA Cores | 2304 |
| GPU Clock | 1492 MHz Boost |
| Memory Clock | 14 Gbps |
| Memory Size | 6GB GDDR6 |
| Memory Interface | 96-bit |
| Bus Interface | PCI Express 4.0 (x8) |
| DirectX | 12 |
| OpenGL | 4.6 |
| PCI-E Power Connector | None |
| Output Ports | HDMI 2.1 x 2, DisplayPort 1.4a x 1 |
Buy MSI GeForce RTX 3050 LP 6G OC
Other Low Profile RTX 3050 6GB models
Most Compact Single Fan RTX 3050 6GB
ZOTAC GAMING GeForce RTX 3050 6GB GDDR6 Solo
[Super Compact, Fits in 99% of PC builds]
The most compact RTX 3050 6GB card that can fit in almost all mini-ITX and SFF PC builds. The card is only 151mm in length and has Dual Slot design. The card is cooled by an aluminum heatsink and a 90mm fan. It is a reference model and has a default GPU Boost Clock of 1470 MHz. Display connectivity options include one HDMI 2.1 port and three DisplayPort 1.4a ports.
| ZOTAC GAMING GeForce RTX 3050 6GB GDDR6 Solo Specifications | |
| CUDA Cores | 2304 |
| GPU Clock | 1470 MHz Boost |
| Memory Clock | 14 Gbps |
| Memory Size | 6GB GDDR6 |
| Memory Interface | 96-bit |
| Bus Interface | PCI Express 4.0 (x8) |
| DirectX | 12 |
| OpenGL | 4.6 |
| PCI-E Power Connector | None |
| Output Ports | HDMI 2.1 x 1, DisplayPort 1.4a x 3 |
Buy ZOTAC GAMING GeForce RTX 3050 6GB GDDR6 Solo
Passively Cooled RTX 3050 6GB
Palit GeForce RTX 3050 KalmX 6GB
[Noiseless Operation, DVI Port is Present]
Palit GeForce RTX 3050 KalmX 6GB is a Passively cooled RTX 3050 6GB model that does not use any fan. For cooling the card uses a large aluminum heatsink with two copper heatpipes. The card is 166mm in length and has a dual-slot design. It is a non-overclocked card with a reference GPU Boost Clock of 1470 MHz. The card does not generate any noise because no fans are present and it is cooled by a heatsink only. This card is suited for those people who want to build a silent system or HTPC by keeping the noise levels to almost zero. The card is 166mm in length and has a dual-slot design. Display connectivity options include one HDMI 2.1 port, one DisplayPort 1.4a port, and one DVI-D port for older monitors.
| Palit GeForce RTX 3050 KalmX 6GB Specifications | |
| CUDA Cores | 2304 |
| GPU Clock | MHz Boost |
| Memory Clock | 14 Gbps |
| Memory Size | 6GB GDDR6 |
| Memory Interface | 96-bit |
| Bus Interface | PCI Express 4.0 (x8) |
| DirectX | 12 |
| OpenGL | 4.6 |
| PCI-E Power Connector | None |
| Output Ports | HDMI 2.1 x 1, DisplayPort 1.4a x 1, DVI-D x 1 |
Buy Palit GeForce RTX 3050 KalmX 6GB
See also:
Have any Queries?
If you have any queries regarding any RTX 3050 6GB custom model then do let me know in the comment section below.
(*This post may contain affiliate links, which means I may receive a small commission if you choose to purchase through the links I provide (at no extra cost to you). Thank you for supporting the work I put into this site!)
